RubyMine 2018.2 Help

Run/Debug Configuration: Gem Command

Use this dialog box to define run/debug configuration for executing a custom Ruby gem.

The dialog box consists of the following tabs:

Configuration tab

ItemDescription
Gem nameIn this field, type the name of the gem whose executable script will be run.
Note that basic code completion is available in this field:
Press Ctrl+Space to show the available gems.
Executable nameIn this field, type the name of the script to run.
Note that basic code completion is available in this field:
Press Ctrl+Space to show the available gem executables.
ArgumentsIn this field, type the command line arguments of the script.
Working directorySpecify the current directory to be used by the running task. By default, the project directory is used as a working directory.
Environment variablesSpecify the list of environment variables as the name-value pairs, separated with semi-colons. Alternatively, click the ellipsis button to create variables and specify their values in the Environment Variables dialog box.
Ruby argumentsSpecify the arguments to be passed to the Ruby interpreter.

Classpath property is added to Nailgun settings.

Ruby SDKSpecify the desired Ruby interpreter. You can opt to choose the project default Ruby SDK, or select a different one from the drop-down list of configured Ruby SDKs.

Bundler tab

ItemDescription
Run the script in the context of the bundleIf this check box is selected, the script in question will be executed as specified in the gemfile.

Code Coverage tab

Use this tab to configure code coverage monitoring options.

ItemDescription
icons general add Click this button to define the scope of code coverage analysis. In the Add Pattern dialog box that opens, type the comma-delimited list of Ruby regular expressions, and specify whether the matching files should be included into or excluded from code coverage analysis.

The patterns defining files to be included into code coverage analysis, are marked with +; the ones to be excluded are marked with -.

Each pattern can be enabled or disabled. To do that, select or clear the check box next to a pattern. By default, all newly created patterns are enabled.

icons general remove svg Click this button to delete the selected pattern from the list.
icons actions edit svg Click this button to change the selected code coverage pattern.
Do not use the optimized C runtimeSelect this check box to enable the option --no-rcovrt. Use this option with discretion, since it significantly slows down performance.
Enable coverage in test folders.If this check box is selected, the folders marked as test root_Test.png are included in the code coverage analysis.

Nailgun tab

ItemDescription
Run new instance of the Nailgun server, or use already started oneThis check box is only available for JRuby used as the project interpreter.

When a run/debug configuration, with this check box selected, is launched, RubyMine analyzes the running processes, and does one of the following, depending on the presence of the running Nailgun server:

  • If there is no running Nailgun server, or if there is a Nailgun server on a non-default port, or with a different gemset, then RubyMine suggests to specify the desired port number.
  • If a Nailgun server runs on the default port with the required gemset, RubyMine does nothing.
  • If a Nailgun server runs on a different port with the required gemset, then RubyMine suggests to specify the desired port number.
  • If a Nailgun server runs on the default port with a different gemset, then RubyMine deletes the -ng argument.

If this check box is not selected, then the script is launched in a usual way, without Nailgun.

Logs tab

Use this tab to specify which log files generated while running or debugging should be displayed in the console, that is, on the dedicated tabs of the Run or Debug tool window.

ItemDescription
Is ActiveSelect check boxes in this column to have the log entries displayed in the corresponding tabs in the Run tool window or Debug tool window.
Log File Entry

The read-only fields in this column list the log files to show. The list can contain:

  • Full paths to specific files.
  • Aliases to substitute for full paths or patterns. These aliases are also displayed in the headers of the tabs where the corresponding log files are shown.

    If a log entry pattern defines more than one file, the tab header shows the name of the file instead of the log entry alias.

Skip ContentSelect this check box to have the previous content of the selected log skipped.
Save console output to fileSelect this check box to save the console output to the specified location. Type the path manually, or click the browse button and point to the desired location in the dialog that opens.
Show console when a message is printed to standard output streamSelect this check box to activate the output console and bring it forward if an associated process writes to Standard.out.
Show console when a message is printed to standard error streamSelect this check box to activate the output console and bring it forward if an associated process writes to Standard.err.
icons general add svgClick this button to open the Edit Log Files Aliases dialog where you can select a new log entry and specify an alias for it.
icons actions edit svgClick this button to edit the properties of the selected log file entry in the Edit Log Files Aliases dialog.
icons general remove svgClick this button to remove the selected log entry from the list.
browseButton.png Click this button to edit the select log file entry. The button is available only when an entry is selected.

Common options

When you edit a run configuration (but not a run configuration template), you can specify the following options for it:

ItemDescription
Name In this text box, specify the name for the run/debug configuration. The name will help you identify the created configuration when you choose to edit it later, or when you invoke it, for example. from the Run popup (Shift+Alt+F10).
Share Select this check box to make the run/debug configuration available to other team members.

The shared run/debug configurations are kept in separate xml files under .idea\runConfigurations folder, while the local run/debug configurations are kept in the .idea\workspace.xml.

Single instance only

Toolbar

The tree view of run/debug configurations has a toolbar that helps you manage configurations available in your project as well as adjust default configurations templates.

ItemShortcutDescription
icons general add svgAlt+InsertCreate a run/debug configuration.
icons general remove svgAlt+Delete Delete the selected run/debug configuration. Note that you cannot delete default configurations.
icons actions copy svg Ctrl+D Create a copy of the selected run/debug configuration. Note that you create copies of default configurations.
icons general settings svg Edit Templates View and edit the default template for the selected run/debug configuration. The templates are used for newly created configurations.
icons actions moveUp svg/icons actions moveDown svgAlt+Up/Alt+Down

Move the selected run/debug configuration up and down in the list.

The order of configurations in the list defines the order, in which the configurations appear when you choose a run/debug configuration.

Default templates of run/debug configurations are always sorted alphabetically.

icons actions newFolder svg Move into new folder / Create new folder

You can group run/debug configurations by placing them into folders.

To create a folder, select the configurations within a category, click folder, and specify folder name. If only a category is in focus, an empty folder is created.

Then, to move a configuration into a folder, between the folders or out of a folder, use drag-and-drop or icons actions moveUp svg and icons actions moveDown svg buttons.

To remove grouping, select a folder and click icons general remove svg.

icons objectBrowser sorted svg Sort configurations Click this button to sort configurations in the alphabetical order.

Templates

Under the Templates node in the tree view of run configurations, you can select a run configuration template and edit its default settings. This will not affect the configurations that are already created, but will be used as defaults when creating new configurations of the corresponding type.

When you select the Templates node itself, you will be able to adjust general settings that apply to all run/debug configurations:

ItemDescription
Configurations available in Run Dashboard

In this section you can create a list of run configurations available in the Run Dashboard — a tool window that helps you execute and manage multiple run/debug configurations.

Note that the dashboard will only display the configuration types for which you have created one ore more configurations.
Thus, if you add a configuration type for which no configurations exist in the project, this type will not be displayed on the dashboard until you create a configuration of this type.

Confirm rerun with process terminationThe behavior of this checkbox depends on whether the Single instance only option is selected for a particular run/debug configuration.
  • If this checkbox is selected, in case of a single instance, launching a new process (for example, by clicking icons toolwindows toolWindowRun on the main toolbar) while another process is still running, results in showing a dialog box prompting to terminate the current process before launching a new one.
  • If this checkbox is not selected (or in case of multiple instances), RubyMine starts the new process silently.
Temporary configurations limit Specify the maximum number of temporary configurations to be stored and shown in the Select Run/Debug Configuration drop-down list.

Before Launch options

In this area you can specify tasks that must be be performed before starting the selected run/debug configuration. The tasks are performed in the order they appear in the list.

ItemShortcutDescription
icons general add svgAlt+Insert Click this icon to add one of the following available tasks:
  • Run External tool: select to run an external application. In the dialog that opens, select one or multiple applications you want to run. If it is not defined in RubyMine yet, add its definition. For more information, see Configuring Third-Party Tools and External Tools.
  • Run Another Configuration: select to execute another run/debug configuration. In the dialog that opens, select the configuration to be run.
  • Run File Watchers: select this option to have RubyMine apply all the currently active file watchers.
  • Run Grunt task: select this option to run a Grunt task. In the Grunt task dialog box that opens, specify the Gruntfile.js where the required task is defined, select the task to execute, and specify the arguments to pass to the Grunt tool.

    Specify the location of the Node.js interpreter, the parameters to pass to it, and the path to the grunt-cli package.

  • Run Gulp task: select this option to run a Gulp task. In the Gulp task dialog box that opens, specify the Gulpfile.js where the required task is defined, select the task to execute, and specify the arguments to pass to the Gulp tool.

    Specify the location of the Node.js interpreter, the parameters to pass to it, and the path to the gulp package.

  • Run npm Script: select this option to execute an npm script. In the NPM Script dialog box that opens, specify the npm run/debug configuration settings.
  • Start React Native Bundler: select this option to run the bundler automatically, as part of a running or debugging session. by default, this is done through react-native start. If your application uses Expo, you need to run the development server via the start npm task. To do that, click icons actions edit svg, then in the Configure React Native dialog, choose npm script and select start from the list.
  • Compile TypeScript: select to run the built-in TypeScript compiler and thus make sure that all the changes you made to your TypeScript code are reflected in the generated JavaScript files. In the TypeScript Compile Settings dialog that opens, select or clear the Check errors checkbox to configure the behaviour of the compiler in case any errors are detected:
    • If the Check errors checkbox is selected, the compiler will show all the errors and the run configuration will not start.
    • If the Check errors checkbox is cleared, the compiler will show all the detected errors but the run configuration still will be launched.
  • Generate CoffeeScript Source Maps: select this option to generate the source maps for your CoffeeScript sources. In the dialog that opens, specify where your CoffeeScript source files are located.
  • Upload files to Remote Host: select this option to have the application files automatically uploaded to the server according to the default server access configuration.
  • Run Remote External tool: adds a remote SSH external tool.
  • Run Rake task: add a Rake task to be executed prior to running or debugging. To choose a Rake task, click the browse button browseButton, and select the desired task from the list of available tasks.

    Note that code completion is available here.

    runConfigRakeTask
  • Run JRuby compiler: choose this option to execute JRuby compiler with the specified target path, compiler process heap size, and command line parameters (if any).
icons general remove svgAlt+Delete Click this icon to remove the selected task from the list.
icons actions edit svg Enter Click this icon to edit the selected task. Make the necessary changes in the dialog that opens.
icons actions moveUp svg/icons actions moveDown svgAlt+Up/Alt+DownClick these icons to move the selected task one line up or down in the list. (The tasks are performed in the order that they appear in the list.)
Show this pageSelect this checkbox to show the run/debug configuration settings prior to actually starting the run/debug configuration.
Activate tool window

If this checkbox is selected, which it is by default, the Run or the Debug tool window opens when you start the run/debug configuration.

Otherwise, the tool window isn't shown. However, when the configuration is running, you can open the corresponding tool window for it yourself by pressing Alt+4 or Alt+5.

Last modified: 6 August 2018

See Also