PhpStorm features robust, fast, and flexible static code analysis. It detects compiler and runtime errors, suggests corrections and improvements before you even compile.
In this section:
- Code analysis basics
- Inspection profiles
- Inspection severity
- Inspection scope
- Examples of code inspections
Code analysis basics
PhpStorm performs code analysis by applying inspections to your code. Numerous code inspections exist for PHP and for the other supported languages.
The inspections detect not only compiling errors, but also different code inefficiencies. Whenever you have some unreachable code, unused code, non-localized string, unresolved method, memory leaks or even spelling problems – you'll find it very quickly.
PhpStorm's code analysis is flexibly configurable. You can enable/disable each code inspection and change its severity, create profiles with custom sets of inspections, apply inspections differently in different scopes , suppress inspections in specific pieces of code, and more.
The analysis can be performed in several ways:
- By default, PhpStorm analyses all open files and highlights all detected code issues right in the editor. On the right side of the editor you can see the analysis status of the whole file – the icon in the top changes its color when a problem is detected.
- Alternatively, you can run code analysis in a bulk mode for the specified scope, which can be as large as the whole project.
- If necessary, you can apply a single code inspection in a specific scope.
For most of detected code issues, PhpStorm provides quick fix suggestions. You can quickly review errors in a file by navigating from one highlighted line to another by pressing F2/⇧+F2.
When you inspect your code, you can tell PhpStorm which types of problems you would like to search for and get reports about. Such configurations can be preserved as inspection profiles.
An inspection profile defines the types of problems to be sought for, i.e. which code inspections are enabled/disabled and the severity of these inspections. Profiles are configurable in the Inspections settings page.
To set the current inspection profile (the one that is used for the on-the-fly code analysis in the editor), simply select it in the Inspections settings page and apply changes. When you perform code analysis or execute a single inspection, you can specify which profile to use for each run.
Inspection profiles can be applicable for the entire IDE or for a specific project:
are shared and accessible for the team members via VCS. They are stored in the project directory:
are intended for personal use only and are stored locally in XML files under the
If necessary, you can change the applicability of the profile (current project of IDE) and, consequently, its location with the Share profile check box (selected means current project) in the Inspections settings page.
PhpStorm comes with the following pre-defined inspection profiles:
This local (IDE level) profile is intended for personal use, applies to all projects,
and is stored locally in the
Default.xmlfile under the
Project Default: when a new project is created, the
profile is copied from the
settings of a template project. This profile is shared and applies to the
After a project is created, any modifications to the project default profile will pass unnoticed to any other projects.
When the settings of the Project Default profile are modified in the Template Project settings, the changed profile will apply to all newly created projects, but the existing projects will not be affected as they already have a copy of this profile.
Project Default profile is stored in the
Project_Default.xmlfile located in the
One can have as many inspection profiles as required. There are two ways of creating new profiles: you can add a new profile as a copy of the Project Default profile or copy the currently selected profile. The newly created profiles are stored in XML files, located depending on the type of the base profile.
<profile_name>.xml files representing inspection profiles appear whenever
some changes to the profiles are done and applied.
The files only store differences against the default profile.
Refer to the section Customizing Profiles for details.
Inspection severity indicates how seriously the code issues detected by the inspection impact the project and determines how the detected issues should be highlighted in the editor. By default, each inspection has one of the following severity levels:
- Server problem
- Weak Warning
You can increase or decrease the severity level of each inspection. That is, you can force PhpStorm to display some warnings as errors or weak warnings. In a similar way, what is initially considered a weak warning can be displayed as a warning or error, or just as info.
You can also configure the color and font style used to highlight each severity level. Besides, you can create custom severity levels and set them for specific inspections.
If necessary, you can set different severity levels for the same inspection in different scopes.
For more information and procedural descriptions, see Configuring Inspection Severities.
By default, all enabled code inspections apply to all project files. If necessary, you can configure each code inspection (enable/disable, change its severity level and options) individually for different scopes. Such configurations, like any other inspection settings, are saved and applied as part of a specific profile.
There may be complicated cases when an inspection has different configurations associated with different scopes. When such inspection is executed in a file belonging to some or all of these scopes, the settings of the highest priority scope-specific configuration are applied. The priorities are defined by the relative position of the inspection's scope-specific configuration in inspection settings: the uppermost configuration has the highest priority. The Everywhere else configuration always has the lowest priority.
For more information and procedural descriptions, see Configuring Inspection for Different Scopes.
Examples of code inspections
In the Inspections page, all inspections are grouped into categories. The most common tasks covered by code analysis are:
- Finding probable bugs.
- Locating dead code.
- Detecting performance issues.
- Improving code structure and maintainability.
- Conforming to coding guidelines and standards.
- Conforming to specifications.
Examples of PHP Code Inspections
This inspection detects attempts to include not actually existing files and suggests two quick fixes: to create a file with the specified name or use a PHPDOC annotation.
Dynamic method is called as static
This inspection checks whether a call to a static function is actually applied to a static function.
do_something() is called as static while actually it is dynamic.
Unimplemented abstract method in class
This inspection checks whether classes inherited from abstract superclasses are either explicitly declared as abstract or the functions inherited from the superclass are implemented.
ConcreteClass is inherited from an abstract class
AbstractClass and has not been explicitly declared as abstract.
At the same time, the function
which is inherited from
AbstractClass, has not been implemented.
PHP variables do not have types, therefore basically parameter types are not specified in definitions of functions. However, if the type of a parameter is defined explicitly, the function should be called with parameters of the appropriate type.
do_something has the parameter of the type
integer but is called with a
Undefined class constant
This inspection detects references to constants that are not actually defined in the specified class.
NotExistingConst is referenced to as a constant of the class
Animal, while actually it is not defined in this class.
Undefined constant inspection
This inspection detects references to constants that are not actually defined anywhere within the inspection scope.
The referenced constant
UndefinedConst is not defined anywhere within the inspection scope.
This inspection detects references to classes that are not actually defined anywhere within the inspection scope.
The referenced class
NotExistingClass is not defined.
This inspection detects references to fields of a class that are not actually defined in this class.
$obj variable is an instance of the class
The declaration of the
$var contains a reference to the
field field of the class
Animal, which is not defined on this class.
Call of undefined function
This inspection detects references to functions that are not defined anywhere within the inspection scope.
The called function
undefined_function() is not defined anywhere within the inspection scope.
This inspection detects references to variables that are not declared and initialized anywhere within the inspection scope. PHP does not require that each variable should be declared and initialized. PHP can initialize such variable on the fly and assign it the zero value. However, this inspection allows you to detect discrepancies of this kind.
In the PHP context, the Undefined field and Undefined method inspections may erroneously report severe problems when actually no problems take place.
This happens when you attempt to access a property or to assign a value to a property that is not explicitly defined while the referenced class contains the
magic methods. No error should be reported because these methods are invoked every time an undefined property is referenced,
however, PhpStorm still treats them as errors or warnings, depending on the severity you have specified for the inspection in general.
To suppress reporting errors in such cases, re-configure the inspection severity. To do that, open the Inspections page of the Settings dialog box, click the inspection name in the list and select the Downgrade severity if __magic methods are present in class check box in the Options area. After that undefined properties in such cases will be indicated one step lower than specified fir inspections in general, by default, Info instead of Warning.