Click thumbnail to view larger image.
- The progress bar shows the percentage of tests executed so far.
- The color of the status bar indicates whether the tests have passed successfully. If at least one of the tests fails, the status bar turns red.
- The left-hand pane shows the tree view of all tests within the current run/debug
- The root node represents the test case selected to run.
- The nested nodes represent the hierarchy of test suites and test cases.
- The leaf nodes represent the individual tests.
- The testing toolbar provides controls that enable you to monitor the tests and analyze results. Some of the commands are duplicated on the context menus of the test tree nodes and the entries in the Statistics pane.
- The Output pane shows the output of the current test suit.
- The Statistics pane shows the list of executed tests with the time used for executing each test and the test result.
|Item||Tooltip and Shortcut||Description|
Ctrl+F5Ctrl+F5Ctrl+5Ctrl+F5Ctrl+F5Ctrl+Alt+RCtrl+F5Ctrl+F5Command RCommand RCommand R
|Click this button to rerun the current process.
The process reruns always in the same console regardless of whether this console is pinned or not.
Stop and rerun
|Click this button to stop executing the current test session and have the test re-started automatically. When the test execution stops, the button toggles to Rerun|
Ctrl+F2Ctrl+F2Ctrl+2Ctrl+F2Ctrl+F2Shift+F5Shift+F5 or Ctrl+Shift+DeleteCtrl+F2Command F2Command F2Command F2
|Click this button to terminate the current process externally by means of the standard mechanisms.|
|Layout||Click this button to choose a layout of the toolbars by selecting the desired option from the pop-up menu.|
|Pin||When this button is pressed, the current tab will not be overwritten; instead, the results of the next command will be displayed in a new tab.|
|Ctrl+Shift+F4Ctrl+Shift+F4Ctrl+Shift+4Ctrl+Shift+F4Ctrl+Shift+F4Ctrl+Shift+F4Ctrl+Shift+F4Ctrl+WControl Shift F4Control Shift F4Command W||Click this button to close the selected tab of the Run tool window and terminate the current process.|
|F1F1F1F1F1F1F1F1ContextHelpContextHelpContextHelp||Click this button to show reference.|
|Hide Passed||Press this button, to have PhpStorm show only the failed tests or the tests that encountered problems in the left-hand pane. If this button is not pressed, all tests are displayed in the tree view.|
|Sort alphabetically||Click this button to sort tests in alphabetical order.|
|Expand All/Collapse All
Ctrl+NumPad+ or Ctrl+EqualsCtrl+NumPad+ or Ctrl+EqualsCtrl+NumPad+ or Ctrl+EqualsCtrl+NumPad+ or Ctrl+EqualsCtrl+NumPad+ or Ctrl+EqualsCtrl+NumPad+ or Ctrl+EqualsCtrl+NumPad+ or Ctrl+EqualsCtrl+NumPad+ or Ctrl+EqualsCommand NumPad or Command EqualsCommand NumPad or Command EqualsCommand NumPad or Command Equals Ctrl+NumPad - or Ctrl+MinusCtrl+NumPad - or Ctrl+MinusCtrl+NumPad - or Ctrl+MinusCtrl+NumPad - or Ctrl+MinusCtrl+NumPad - or Ctrl+MinusCtrl+NumPad - or Ctrl+MinusCtrl+NumPad - or Ctrl+MinusCtrl+NumPad - or Ctrl+MinusCommand NumPad - or Command MinusCommand NumPad - or Command MinusCommand NumPad - or Command Minus
|Click these buttons to have all nodes in the tree view of tests expanded.
These buttons are only available if the tested application contains more than test case.
|Previous/Next Failed Test
|Click this button to navigate between the failed tests.|
|Export Test Results||Click this button to have the results of the selected test saved in a file. IN the Export Test Results that opens, specify the file to save the output in and the format in which the data will be saved.|
|Click this cog button to access the context menu with the following options:
Test Status Icons
|Test error. This status is assigned to tests that caused an exception from the tested source code.|
|Test failed. If at least one test receives this status, the entire tree is marked as terminated as well.|
|Test in progress.|
|Test passed successfully.|
|Test terminated. This status is assigned to tests that were cancelled by clicking the Stop button . If at least one test receives this status, the entire tree is marked as terminated as well.|
|Test not run. This status is assigned to a test when PhpStorm has not launched it at all, for example, because testing was terminated by clicking the Stop button .|
This pane shows output of each test, generated at runtime, including all the messages sent to the output stream, and the error messages. The following table shows the toolbar buttons and context menu commands available for the Output pane.
|Up the Stack Trace
|Click this button to navigate up in the stack trace and have the cursor jump to the corresponding location in the source code.|
|Down the Stack Trace
|Click this button to navigate down in the stack trace and have the cursor jump to the corresponding location in the source code.|
|Use Soft Wraps||Click this button to toggle the soft wrap mode of the output.|
|Scroll to the end||Click this button to navigate to the bottom of the stack trace and have the cursor jump to the corresponding location in the source code.|
|Click this button to configure printing out the console output in the Print dialog box that opens.|
|Clear All||Choose this item on the context menu to have all messages for the selected test deleted.|
|Copy Content||Ctrl+C or Ctrl+InsertCtrl+C or Ctrl+InsertCtrl+C or Ctrl+InsertCtrl+C or Ctrl+InsertCtrl+Insert, Alt+C or Escape, WCtrl+C or Ctrl+InsertCtrl+C or Ctrl+InsertCtrl+C or Ctrl+InsertCommand C or Command InsertCommand C or Command InsertCommand C or Command Insert||Choose this item on the context menu to have the current contents of the Output pane placed to the Clipboard.|
|Compare with Clipboard||Choose this item on the context menu to invoke the Differences Viewer which shows the current contents of the Clipboard in the left-hand pane and the contents of the Output pane for the selected test in the right-hand pane. pane.|
This pane shows how long it took to execute a test suite and the number of passed and failed tests within it. You can have information in columns shown in the ascending or descending order by clicking the column headers.
To view statistics on each test separately, double click the test suite which contains the desired test. The pane shows a list of all the tests in the selected suit.
The Context menu commands are the same as for the tree view of tests.
|Test||Name of the test class or test method.|
|Time elapsed||The number of seconds spent to to execute this test.|
|Results||This column shows summary information about the test execution results. For individual tests, the column shows the pass or fail status. For test case or test suites, the column shows the number of failed and passed tests within it.|
Context menu commands
|Create <test name>||Create a run/debug configuration on the base of the selected test.|
|Run <test name>||Ctrl+Shift+F10Ctrl+Shift+F10Ctrl+Shift+F10Ctrl+Shift+F10Ctrl+Shift+F10Ctrl+F9Shift+Alt+F6 or Shift+F6Ctrl+Shift+F10Control Shift RControl Shift RControl Shift R||Run the selected test with the current temporary run/debug configuration or choose another configuration from the subordinate context menu.|
|Debug <test name>||Debug the selected test with the current temporary run/debug configuration or choose another configuration from the subordinate context menu.|
|Run <test name> with Coverage||Ctrl+Shift+F10Ctrl+Shift+F10Ctrl+Shift+F10Ctrl+Shift+F10Ctrl+Shift+F10Ctrl+F9Shift+Alt+F6 or Shift+F6Ctrl+Shift+F10Control Shift RControl Shift RControl Shift R||Run the selected test and collect coverage data in accordance with the current temporary run/debug configuration.|
|Jump to Source||F4F4F4F4F4F4F4F12 or Ctrl+Shift+ECommand Down or F4Command Down or F4F3||Choose this command to move the focus to the editor, to the definition of a test class, or test method.|
|Show Source||Ctrl+EnterCtrl+EnterCtrl+EnterCtrl+EnterCtrl+EnterCtrl+EnterCtrl+EnterCtrl+EnterCommand EnterCommand EnterCommand Enter||Choose this command to open source code in the editor, but leave the focus with the Test Runner tab.|
|Show Statistics||Choose this command to open the Statistics pane if it is closed.|