Brand Guidelines

DO’s and DON’Ts

DO

Feel free to use our logos to link to the JetBrains website or refer to JetBrains products. You may also use these to advertise that your product has built-in integration with a JetBrains product.

Use Colors from the Color Palette

The JetBrains logo can be used on any of the colors in the Color Palette; however, black is preferable.

Use Colors from the Color Palette

Respect the Minimum Clear Space

It is ‘1x’ (x = 25% the height of the Black Box) around the entire logo. No text or graphics can intrude into this area.

Respect the Minimum Clear Space

Respect the Minimum Size

In print the smallest size the logo can be reproduced at is 7.5mm and on screen / digital the smallest size is 50px.

Respect the Minimum Size

Use Solid Beams for Black & White

For black and white printing, the beams should be turned into a solid grey or white (see Color Palette). The beams in the black and white logo can only appear in one of the two specified greys. The beams must never appear in black. The Black Box must remain untouched.

Use Solid Beams for Black & White

Use Photographs and Any Color as Background

The JetBrains logo can be used on a wide array of background colors; however, black is preferable. You can also use photographs as backgrounds for the JetBrains logo. It is important that the photograph or color not compromise the full legibility of the logo.

Use Photographs and Any Color as Background

DON’T

Below are examples of what not to do with the JetBrains logo.They are designed to give a general overview of bad practices, and should always be adhered to.

Do Not Place the Tagline Over the Beams

Ensure that the tagline never overlaps any of the beams and follows the rules set out on the previous pages.

Do Not Place the Tagline Over the Beams

Do Not Change the Colors of the Beams

When using the logo, do not change the color of the beams. Always use the master artwork provided when using the logo to ensure accurate reproduction.

Do Not Change the Colors of the Beams

Do Not Distort the Logo

Ensure that the JetBrain logo is never squashed or distorted. Always use the master artwork provided when using the logo to ensure accurate reproduction.

Do Not Distort the Logo

Do Not Change the Black Box Color

Ensure that the Black Box is always black and never changed to another color, even from the official color palette.

 Do Not Change the Black Box Color

Do Not Place Beams Over Black Box

Make sure that the beams are never overlapping the Black Box. Whilst the beams can be rearranged, they can never overlap the box.

Do Not Place Beams Over Black Box

Do Not Divorce the Beams and the Logo

Whilst the beams can be rearranged they must never appear separate from the Black Box.

Do Not Divorce the Beams and the Logo

Do Not Align the Black Box to the Edge

Ensure that the Black Box always has the minimum clear space around it. Whilst the beams can be cropped, the Black Box cannot.

Do Not Align the Black Box to the Edge

Do Not Separate the Black Box and Beams

Never use the Black Box without the beams behind. This will make the logo disappear in the background and lose the energy created.

 Do Not Separate the Black Box and Beams

Color Palette

The JetBrains color palette has been created to allow maximum flexibility and give a strong set of colors for use. These colors have also been used to create the corporate and product logos.

Fonts

Priority should be given to Gotham, and then Proxima Nova. Both fonts require an appropriate license. If you do not have one, you may use Arial.

Gotham is used as JetBrains primary typeface. It is the font used for headlines and body copy.

Gotham

Proxima Nova shares an aesthetic very similar to Gotham. It could be used as an alternative if Gotham is not available.

Proxima Nova

Brand Usage & Trademarks

Brand Usage

The trademarks ("Marks") and logo images ("Logos") displayed on this page are the property of JetBrains. Any uses of JetBrains logos and/or JetBrains trademarks should link back to www.jetbrains.com. You may use JetBrains Marks and Logos under the following conditions:

  • Spell and capitalize trademarks exactly as they are shown in the Trademarks section below. E.g., always capitalize the “J” and “B” and leave no space between “Jet” and “Brains”.
  • You may not alter Logos in any way except pixel dimensions, which must always be in the same proportions as the original image provided in the Logos section. All Marks in reduced-size Logos must remain clearly identifiable and readable.
  • You may not use Logos in any manner that represents or implies any affiliation with or endorsement by JetBrains when no such affiliation or endorsement has been formally established in writing with JetBrains.

JetBrains reserves the right to determine what constitutes improper or inappropriate use of JetBrains Marks and Logos. You agree to correct any improper/inappropriate use of JetBrains Marks and Logos, or to cease using the same upon notification from JetBrains.

Trademarks List

Company

JetBrains

Develop with Pleasure!

The Drive to Develop

Tools Matter

Products

AppCode

CLion

DataGrip

Datalore

dotCover

dotMemory

dotPeek

dotTrace

IntelliJ

IntellIJ IDEA

GoLand

Rider

Kotlin

Meta Programming System (MPS)

PhpStorm

PyCharm

PyCharm Edu

ReSharper

ReSharper C++

RubyMine

JetBrains Toolbox

TeamCity

Upsource

WebStorm

YouTrack


Contact us

Have any questions?

Contact us at marketing@jetbrains.com