IntelliJ IDEA 2016.3 Help

Run/Debug Configuration: XSLT

This run/debug configuration becomes available, when XPath View+XSLT Support plugin is enabled.

On this page

Getting access to the Run/Debug Configuration: XSLT dialog

Make sure the XPath View+XSLT Support plugin is enabled. The plugin is bundled with IntelliJ IDEA and activated by default. If the plugin is not activated, enable it on the Plugins page of the Settings / Preferences Dialog as described in Enabling and Disabling Plugins.

Settings tab

ItemDescription
Input Use the controls in this area to specify the XML file to process and the script to be executed.
  • XSLT Script File - in this text box, specify the path to the XSLT stylesheet file. Type the path manually or click the Browse button browseButton.png and select the desired file in the Choose XSLT File dialog box, that opens.
  • Choose XML Input File - from this drop-down list, select the XML input file to be transformed. The list contains all the XML files that have been associated with the chosen stylesheet via the File Associations functionality. To specify a file, which is not on the list, click the Browse button browseButton.png and select the desired file in the Choose XML File dialog box, that opens.
Output Use the controls in this area to configure handling of the script output.
  • Show in Default Console - select this option to have the output displayed in the normal run console, together with any warnings and error messages from the XSLT transformer, as well as messages generated by the script, e.g. by xsl:message.
  • Show in Extra Console Tab - select this option to have the produced output displayed in an extra, XSLT Output, tab.

    This option is selected by default.

  • Highlight Output As - from this drop-down list, select the file type to highlight the output as.
  • Save to File - select this option to have the output saved directly to a file. In the text box, specify the name of the target file. Type the path to the file manually or click the Browse button browseButton.png and select the desired file in the Choose Output File dialog box, that opens. If you type the name of a file that does not exist, IntelliJ IDEA will create a file and save the output to it.
    • Open File in Editor After Execution - select this check box to have the file with the output opened in the editor after the script is executed successfully.
    • Open File in Web Browser After Execution - select this check box to have the file with the output opened in the configured Web browser after the script is executed successfully.
Parameters Use the controls in this area to create and manage a list of parameters to be passed to the script.
  • Add (add.png) - click this button to create a new entry.
  • Remove (delete.png) - click this button to remove the selected entry from the list.
  • Name - in this text box, specify the name of the parameter.
  • Value - in this text box, specify the value of the parameter.

Advanced tab

In this tab, configure additional options that are not commonly required in run configurations.

ItemDescription
Smart Error Handling
  • Clear this check box to have the console display full error messages including their complete stack traces, when an error occurs during execution.
  • Select this check box to suppress showing staktraces and have the console display only the relevant information about errors.
VM ArgumentsIn this text box, specify optional VM arguments to be passed to the VM where the XSLT script is executed. These can be heap size, garbage collection options, file encoding, etc. If the line of VM arguments is too long, click the editorIcon.gif button and and type the text in the VM Arguments dialog box, that opens.
Working DirectoryIn this text box, specify the working directory to use. Type the path manually or click the Browse button browseButton.png and select the desired folder in the Working Directory dialog box, that opens.

If no folder is specified in text box, the working directory will be the one where the XSLT script file is located.

Classpath and JDKIn this area, specify the environment to run the script in. By default, it is the module the XSLT file belongs to.
  • From Module - select this option to execute the script in a specific module. From this drop-down list, select the desired module.
  • Use JDK - select this option to choose the JDK without including anything module- or project-related into the classpath.

Toolbar

ItemShortcutDescription
/help/img/idea/2016.3/new.png Alt+Insert Click this button to add a new configuration to the list.
/help/img/idea/2016.3/delete.png Alt+Delete Click this button to remove the selected configuration from the list.
/help/img/idea/2016.3/copy.gif Ctrl+D Click this button to create a copy of the selected configuration.
/help/img/idea/2016.3/settings.png Edit defaultsClick this button to edit the default configuration templates. The defaults are used for newly created configurations.
/help/img/idea/2016.3/arrowUp.png or /help/img/idea/2016.3/arrowDown.png Alt+Up or Alt+Down Use these buttons to move the selected configuration or folder up and down in the list.

The order of configurations or folders in the list defines the order in which configurations appear in the Run/Debug drop-down list on the main toolbar.

folder Move into new folder / Create new folder Use this button to create a new folder.

If one or more run/debug configurations are in focus, the selected run/debug configurations are automatically moved to the newly created folder. If only a category is in focus, an empty folder is created.

Move run/debug configurations to a folder using drag-and-drop, or the /help/img/idea/2016.3/arrowUp.png /help/img/idea/2016.3/arrowDown.png buttons.

/help/img/idea/2016.3/sortAlphabetically.png Sort configurations Click this button to sort configurations in alphabetical order.

Common options

ItemDescription
NameIn this text box, specify the name of the current run/debug configuration. This field does not appear for the default run/debug configurations.
Defaults This node in the left-hand pane of the dialog box contains the default run/debug configuration settings. Select the desired configuration to change its default settings in the right-hand pane. The defaults are applied to all newly created run/debug configurations.
Share Select this check box to make the run/debug configuration available to other team members.

If the directory-based project format is used, the settings for a run/debug configuration are stored in a separate .xml file in the .idea\runConfigurations folder if the run/debug configuration is shared, or in the .idea\workspace.xml file otherwise.

If the file-based format is used, the settings are stored in the .ipr file for shared configurations, or in the .iws file otherwise.

This check box is not available when editing the run/debug configuration defaults.

Single instance onlyIf this check box is selected, this run/debug configuration cannot be launched more than once.

Every time a new run/debug configuration is launched, IntelliJ IDEA checks the presence of the other instances of the same run/debug configuration, and displays a confirmation dialog box. If you click OK in the confirmation dialog box, the first instance of the runner will be stopped, and the next one will take its place.

This makes sense when the usage of certain resources can cause conflicts, or when launching two run/debug configurations of the same type consumes too much of the CPU and memory resources.

If this check box is not selected, it is possible to launch as many instances of the runner as required. So doing, each runner will start in its own tab of the Run tool window.

Before launchSpecify which tasks must be performed before applying the run/debug configuration. The specified tasks are performed in the order they appear in the list.
ItemKeyboard shortcutDescription
/help/img/idea/2016.3/new.png Alt+Insert Click this icon to add a task to the list. Select the task to be added:
  • Run External tool. Select this option to run an application which is external to IntelliJ IDEA. In the dialog that opens, select the application or applications that should be run. If the necessary application is not defined in IntelliJ IDEA yet, add its definition. For more information, see Configuring Third-Party Tools and External Tools.
  • Make. Select this option to have the project or module compiled. The Make Module command will be carried out if a particular module is specified in the run/debug configuration, and the Make Project command otherwise.

    If an error occurs during the compilation, IntelliJ IDEA won't attempt to start the run/debug configuration.

  • Make, no error check. The same as the Make option but IntelliJ IDEA will try to start the run/debug configuration irrespective of the compilation result.
  • Build Artifacts. Select this option to have an artifact or artifacts built. In the dialog that opens, select the artifact or artifacts that should be built.

    See also, Working with Artifacts.

  • Run Another Configuration. Select this option to have another run/debug configuration executed. In the dialog that opens, select the configuration to run.

    This option is available only if you have already at least one run/debug configuration in the current project.

  • Run Ant target. Select this option to have an Ant target run. In the dialog that opens, select the target to be run. For more information, see Ant.
  • Run Grunt task. Select this option to run a Grunt task. In the Grunt task dialog box that opens, specify the Gruntfile.js where the required task is defined, select the task to execute, and specify the arguments to pass to the Grunt tool.

    Specify the location of the Node.js interpreter, the parameters to pass to it, and the path to the grunt-cli package.

  • Run Gulp task. Select this option to run a Grunt task. In the Gulp task dialog box that opens, specify the Gulpfile.js where the required task is defined, select the task to execute, and specify the arguments to pass to the Gulp tool.

    Specify the location of the Node.js interpreter, the parameters to pass to it, and the path to the gulp package.

  • Run npm Script. Select this check box to execute an npm script. In the NPM Script dialog box that opens, specify the package.json file where the required script is defined, select the script to execute, choose the command to apply to it, and specify the arguments to execute the script with.

    Specify the location of the Node.js interpreter and the parameters to pass to it.

  • Compile TypeScript. Select this option to run the built-in TypeScript compiler and thus make sure that all the changes you made to your TypeScript code are reflected in the generated JavaScript files. In the TypeScript Compile Settings dialog that opens, select or clear the Check errors check box to configure the behaviour of the compiler in case any errors are detected:
    • If the Check errors check box is selected, the compiler will show all the errors and the run configuration will not start.
    • If the Check errors check box is cleared, the compiler will show all the detected errors but the run configuration still will be launched.
  • Generate CoffeeScript Source Maps. Select this option to have the source maps for your CoffeeScript sources generated. In the dialog that opens, specify where your CoffeeScript source files are located. For more information, see CoffeeScript Support.
  • Run Maven Goal. Select this option to have a Maven goal run. In the dialog that opens, select the goal to be run.

    For more information, see Maven.

  • Run Remote External tool: Add a remote SSH external tool. Refer to the section Remote SSH External Tools for details.
  • Upload files to Remote Host. Select this option to have the application files automatically uploaded to the server according to the default server access configuration. For more information, see Configuring Synchronization with a Web Server and Uploading and Downloading Files.
/help/img/idea/2016.3/delete.png Alt+Delete Click this icon to remove the selected task from the list.
/help/img/idea/2016.3/editFlexLibraryNew.png Enter Click this icon to edit the selected task. Make the necessary changes in the dialog that opens.
/help/img/idea/2016.3/arrowUp.png Alt+Up Click this icon to move the selected task one line up in the list.
/help/img/idea/2016.3/arrowDown.png Alt+Down Click this icon to move the selected task one line down in the list.
Show this page Select this check box to have the run/debug configuration settings shown prior to actually starting the run/debug configuration.
Active tool windowSelect this option if you want the Run/Debug tool windows to be activated automatically when you run/debug your application. This option is enabled by default.

See Also

Last modified: 29 November 2016