IntelliJ IDEA 2018.2 Help

Run/Debug Configuration: Capistrano

Use this dialog box to define run/debug configuration for a Capistrano task.

The dialog box consists of the following tabs:

Configuration tab

Item

Description

Name

In this text box, specify the name of the current run/debug configuration.

Task name

Specify the name of the Capistrano task to be executed.

Task arguments

Specify the list of the arguments to be passed to the Capistrano task. The arguments should be separated with spaces.

Stages

Select the desired stage. Stages can be configured in the config/deploy.rb file that appears after capifying an application.

If your project makes use of one stage only, the default stage corresponds to production. Refer to 2.x Multistage Extension for details.

Turn on invoke/execute tracing, enable full backtrace (--trace)

Select this checkbox to turn on the standard Capistrano --trace option.

Working directory

Specify the current directory to be used by the running task. By default, the project directory is used as a working directory.

Environment variables

Specify the list of environment variables as the name-value pairs, separated with semi-colons. Alternatively, click the ellipsis button to create variables and specify their values in the Environment Variables dialog box.

Ruby arguments

Specify the arguments to be passed to the Ruby interpreter.

Classpath property is added to Nailgun settings.

Ruby SDK

Specify the desired Ruby interpreter. You can opt to choose the project default Ruby SDK, or select a different one from the drop-down list of configured Ruby SDKs.

Logs tab

Use this tab to specify which log files generated while running or debugging should be displayed in the console, that is, on the dedicated tabs of the Run or Debug tool window.

Item

Description

Is Active

Select check boxes in this column to have the log entries displayed in the corresponding tabs in the Run tool window or Debug tool window.

Log File Entry

The read-only fields in this column list the log files to show. The list can contain:

  • Full paths to specific files.

  • Ant patterns that define the range of files to be displayed.

  • Aliases to substitute for full paths or patterns. These aliases are also displayed in the headers of the tabs where the corresponding log files are shown.

    If a log entry pattern defines more than one file, the tab header shows the name of the file instead of the log entry alias.

Skip Content

Select this check box to have the previous content of the selected log skipped.

Save console output to file

Select this check box to save the console output to the specified location. Type the path manually, or click the browse button and point to the desired location in the dialog that opens.

Show console when a message is printed to standard output stream

Select this check box to activate the output console and bring it forward if an associated process writes to Standard.out.

Show console when a message is printed to standard error stream

Select this check box to activate the output console and bring it forward if an associated process writes to Standard.err.

icons general add svg

Click this button to open the Edit Log Files Aliases dialog where you can select a new log entry and specify an alias for it.

icons actions edit svg

Click this button to edit the properties of the selected log file entry in the Edit Log Files Aliases dialog.

icons general remove svg

Click this button to remove the selected log entry from the list.

Bundler tab

Item

Description

Run the script in the context of the bundle

If this check box is selected, the script in question will be executed as specified in the gemfile.

Code Coverage tab

Use this tab to configure code coverage monitoring options.

Item

Description

Choose coverage runner

Select the desired code coverage runner.

By default, IntelliJ IDEA uses its own coverage engine with the Sampling mode. You can also choose JaCoCo or Emma for calculating coverage.

Sampling

Select this option to measure code coverage with minimal slow-down.

Tracing

Select this option to collect accurate branch coverage. This mode is available for the IntelliJ IDEA code coverage runner only.

Track per test coverage

Select this check box to detect lines covered by one test and all tests covering line. If this check box is selected, junit2x becomes available on the toolbar of the coverage statistic pop-up window.

Refer to the section : view JUnit tests that cover the line at caret. .

Packages and classes to record code coverage data

Click icons toolbarDecorator addClass and icons toolbarDecorator addPackage buttons to specify classes and packages to be measured. You can also remove classes and packages from the list by selecting them in the list and clicking the icons general remove svg button.

Enable coverage in test folders.

If this check box is selected, the folders marked as test root_Test.png are included in the code coverage analysis.

Nailgun tab

Item

Description

Run new instance of the Nailgun server, or use already started one

This check box is only available for JRuby used as the project interpreter.

When a run/debug configuration, with this check box selected, is launched, IntelliJ IDEA analyzes the running processes, and does one of the following, depending on the presence of the running Nailgun server:

  • If there is no running Nailgun server, or if there is a Nailgun server on a non-default port, or with a different gemset, then IntelliJ IDEA suggests to specify the desired port number.

  • If a Nailgun server runs on the default port with the required gemset, IntelliJ IDEA does nothing.

  • If a Nailgun server runs on a different port with the required gemset, then IntelliJ IDEA suggests to specify the desired port number.

  • If a Nailgun server runs on the default port with a different gemset, then IntelliJ IDEA deletes the -ng argument.

If this check box is not selected, then the script is launched in a usual way, without Nailgun.

Common options

When you edit a run configuration (but not a run configuration template), you can specify the following options for it:

Item

Description

Name

In this text box, specify the name for the run/debug configuration. The name will help you identify the created configuration when you choose to edit it later, or when you invoke it, for example. from the Run popup (Shift+Alt+F10).

Share

Select this check box to make the run/debug configuration available to other team members.

If the directory-based project format is used, the settings for a run/debug configuration are stored in a separate .xml file in the .idea\runConfigurations folder if the run/debug configuration is shared, or in the .idea\workspace.xml file otherwise.

If the file-based format is used, the settings are stored in the .ipr file for shared configurations, or in the .iws file otherwise.

Single instance only

Toolbar

The tree view of run/debug configurations has a toolbar that helps you manage configurations available in your project as well as adjust default configurations templates.

Item

Shortcut

Description

icons general add svgAlt+Insert

Create a run/debug configuration.

icons general remove svgAlt+Delete

Delete the selected run/debug configuration. Note that you cannot delete default configurations.

icons actions copy svg

Ctrl+D

Create a copy of the selected run/debug configuration. Note that you create copies of default configurations.

icons general settings svg

Edit Templates

View and edit the default template for the selected run/debug configuration. The templates are used for newly created configurations.

icons actions moveUp svg/icons actions moveDown svg

Alt+Up/Alt+Down

Move the selected run/debug configuration up and down in the list.

The order of configurations in the list defines the order, in which the configurations appear when you choose a run/debug configuration.

Default templates of run/debug configurations are always sorted alphabetically.

icons actions newFolder svg

Move into new folder / Create new folder

You can group run/debug configurations by placing them into folders.

To create a folder, select the configurations within a category, click folder, and specify folder name. If only a category is in focus, an empty folder is created.

Then, to move a configuration into a folder, between the folders or out of a folder, use drag-and-drop or icons actions moveUp svg and icons actions moveDown svg buttons.

To remove grouping, select a folder and click icons general remove svg.

icons objectBrowser sorted svg

Sort configurations

Click this button to sort configurations in the alphabetical order.

Templates

Under the Templates node in the tree view of run configurations, you can select a run configuration template and edit its default settings. This will not affect the configurations that are already created, but will be used as defaults when creating new configurations of the corresponding type.

When you select the Templates node itself, you will be able to adjust general settings that apply to all run/debug configurations:

Item

Description

Configurations available in Run Dashboard

In this section you can create a list of run configurations available in the Run Dashboard — a tool window that helps you execute and manage multiple run/debug configurations.

Note that the dashboard will only display the configuration types for which you have created one ore more configurations.
Thus, if you add a configuration type for which no configurations exist in the project, this type will not be displayed on the dashboard until you create a configuration of this type.

Confirm rerun with process termination

The behavior of this checkbox depends on whether the Single instance only option is selected for a particular run/debug configuration.
  • If this checkbox is selected, in case of a single instance, launching a new process (for example, by clicking icons toolwindows toolWindowRun on the main toolbar) while another process is still running, results in showing a dialog box prompting to terminate the current process before launching a new one.

  • If this checkbox is not selected (or in case of multiple instances), IntelliJ IDEA starts the new process silently.

Temporary configurations limit

Specify the maximum number of temporary configurations to be stored and shown in the Select Run/Debug Configuration drop-down list.

Before Launch options

In this area you can specify tasks that must be be performed before starting the selected run/debug configuration. The tasks are performed in the order they appear in the list.

Item

Shortcut

Description

icons general add svgAlt+Insert

Click this icon to add one of the following available tasks:

  • Run External tool: select to run an external application. In the dialog that opens, select one or multiple applications you want to run. If it is not defined in IntelliJ IDEA yet, add its definition. For more information, see Configuring Third-Party Tools and External Tools.

  • Run Another Configuration: select to execute another run/debug configuration. In the dialog that opens, select the configuration to be run.

  • Build: select to compile the specified module. The Build Module command will be executed.

    If an error occurs during compilation, IntelliJ IDEA won't attempt to start the run/debug configuration.

  • Build Project: select to compile the entire project. The Build Project command will be executed.

    If an error occurs during compilation, IntelliJ IDEA won't attempt to start the run/debug configuration.

  • Build, no error check: the same as the Build option, but IntelliJ IDEA will try to start the run/debug configuration irrespective of the compilation results.

  • Build Artifacts: select this option to build an artifact or artifacts. In the dialog that opens, select the artifact or artifacts that should be built.

  • Run Ant target: select this option to run an Ant target. In the dialog that opens, select the target to be run.

  • Run Grunt task: select this option to run a Grunt task. In the Grunt task dialog box that opens, specify the Gruntfile.js where the required task is defined, select the task to execute, and specify the arguments to pass to the Grunt tool.

    Specify the location of the Node.js interpreter, the parameters to pass to it, and the path to the grunt-cli package.

  • Run Gulp task: select this option to run a Gulp task. In the Gulp task dialog box that opens, specify the Gulpfile.js where the required task is defined, select the task to execute, and specify the arguments to pass to the Gulp tool.

    Specify the location of the Node.js interpreter, the parameters to pass to it, and the path to the gulp package.

  • Run Maven Goal: select this option to run a Maven goal. In the dialog that opens, select the goal to be run.

  • Run npm Script: select this option to execute an npm script. In the NPM Script dialog box that opens, specify the npm run/debug configuration settings.

  • Start React Native Bundler: select this option to run the bundler automatically, as part of a running or debugging session. by default, this is done through react-native start. If your application uses Expo, you need to run the development server via the start npm task. To do that, click icons actions edit svg, then in the Configure React Native dialog, choose npm script and select start from the list.

  • Compile TypeScript: select to run the built-in TypeScript compiler and thus make sure that all the changes you made to your TypeScript code are reflected in the generated JavaScript files. In the TypeScript Compile Settings dialog that opens, select or clear the Check errors checkbox to configure the behaviour of the compiler in case any errors are detected:
    • If the Check errors checkbox is selected, the compiler will show all the errors and the run configuration will not start.

    • If the Check errors checkbox is cleared, the compiler will show all the detected errors but the run configuration still will be launched.

  • Generate CoffeeScript Source Maps: select this option to generate the source maps for your CoffeeScript sources. In the dialog that opens, specify where your CoffeeScript source files are located.

  • Upload files to Remote Host: select this option to have the application files automatically uploaded to the server according to the default server access configuration.

  • Run Remote External tool: adds a remote SSH external tool.

  • Run Rake task: add a Rake task to be executed prior to running or debugging. To choose a Rake task, click the browse button browseButton, and select the desired task from the list of available tasks.

    Note that code completion is available here.

    runConfigRakeTask
  • Run JRuby compiler: choose this option to execute JRuby compiler with the specified target path, compiler process heap size, and command line parameters (if any).

icons general remove svgAlt+Delete

Click this icon to remove the selected task from the list.

icons actions edit svg

Enter

Click this icon to edit the selected task. Make the necessary changes in the dialog that opens.

icons actions moveUp svg/icons actions moveDown svg

Alt+Up/Alt+Down

Click these icons to move the selected task one line up or down in the list. (The tasks are performed in the order that they appear in the list.)

Show this page

Select this checkbox to show the run/debug configuration settings prior to actually starting the run/debug configuration.

Activate tool window

If this checkbox is selected, which it is by default, the Run or the Debug tool window opens when you start the run/debug configuration.

Otherwise, the tool window isn't shown. However, when the configuration is running, you can open the corresponding tool window for it yourself by pressing Alt+4 or Alt+5.

Last modified: 20 November 2018

See Also

Language and Framework-Specific Guidelines: