AppCode supports developing, running, and debugging TypeScript source code. AppCode recognizes .ts and .tsx files and provides full range of coding assistance for editing them without any additional steps from your side. TypeScript files are marked with the icon.
TypeScript-aware coding assistance includes completion for keywords, labels, variables, parameters, and functions, error and syntax highlighting, formatting, numerous code inspections and quick-fixes, as well as common and TypeScript-specific refactoring. AppCode also verifies TypeScript code on the fly and shows errors in a dedicated Problems tool window.
Before you start
Descriptions of the errors detected in the current file and quick-fixes for them are available from the editor and from the Current File tab of the Problems tool window.
Errors across the entire project and quick-fixes for them are shown in the Project Errors tab of the Problems tool window. To open the tool window, click the Inspection widget in the upper-right corner of the editor:
Verify TypeScript in the current file
In the editor, hover the mouse pointer over the highlighted problem. AppCode shows a tooltip with a description of the problem.
Apply the suggested quick-fix or click More actions and select the relevant one from the list.
Alternatively open the Current File tab of the Problems tool window ⌥6, where you can view problem descriptions, apply quick-fixes, navigate to the fragments in the source code where errors occurred, as well as fix them in the Editor Preview pane without leaving the tool window. Learn more from Problems tool window.
Verify TypesScript in the entire project
To open the Problems tool window, click the Inspections widget in the upper-right corner of the editor.
Alternatively selectfrom the main menu or press ⌥6.
Open the Project Errors tab, which shows the errors across the entire project, with error messages grouped by files in which they were detected.
Here you can view problem descriptions, apply quick-fixes, navigate to the fragments in the source code where errors occurred, as well as fix them in the Editor Preview pane without leaving the tool window. Learn more from Problems tool window.
Configure integration with the TypeScript Language Service
In most cases, everything works out of the box and no manual configuration is required. However, if you want to use a custom
typescript package or pass some command-line options to the TypeScript Language Service, you can customize the default settings.
In the Preferences dialog ⌃⌥S, go to .
Alternatively, click the TypeScript widget on the Status bar and select Configure TypeScript.
The TypeScript page opens.
Specify the Node.js interpreter to use. If you choose the Project alias, AppCode will automatically use the project default interpreter from the Node interpreter field on the Node.js and NPM page.
In most cases, AppCode detects the project default interpreter and fills in the field itself. You can also choose another configured local interpreter or click and configure a new one.
In the TypeScript field, specify the version of the TypeScript to use (AppCode displays the currently chosen version).
By default, the
typescriptpackage from the project's node_modules folder is used.
Bundled: choose this option to use the
typescriptpackage that is shipped with AppCode without attempting to find another one.
Select: choose this option to use a custom
typescriptpackage instead of the one bundled with AppCode. In the dialog that opens, choose the path to the relevant package.
If your project package manager is Yarn 2, you have to use the
typescriptpackage installed via Yarn 2. In this case,
yarn:package.json:typescriptis by default selected.
Learn more about package managers from npm and Yarn.
Make sure the TypeScript Language Service checkbox is selected.
Use the controls below to configure the behaviour of the TypeScript Language Service.
In the Options field, specify the command-line options to be passed to the TypeScript Language Service when the tsconfig.json file is not found. See the list of acceptable options at TSC arguments. Note that the
--watch(Watch input files) option is irrelevant.
Restart the TypeScript Language Service
Click the TypeScript widget on the Status bar and select Restart TypeScript Service from the list.
Edit TypeScript code
AppCode brings you smart coding assistance for TypeScript including context-aware code completion, auto import for symbols, documentation look-up, parameter hints, navigation, TypeScript-aware syntax highlighting and linting, refactoring and more.
AppCode can generate import statements for modules, classes, components, and any other TypeScript symbols that are exported. By default, AppCode adds import statements when you complete TypeScript symbols.
See Auto import to learn how to optimize import statements and configure their style.
When you type your code or paste a fragment with a symbol that is not yet imported, AppCode can also generate an import statement for this symbol. If there is only one source to import the symbol from, AppCode inserts an import statement silently. Otherwise, use an import popup or a dedicated import quick-fix.
Add import statements on code completion
In the Preferences dialog ⌃⌥S, go to . The Auto Import page opens.
Add import statements on typing or pasting code
In the Preferences dialog ⌃⌥S, go to . The Auto Import page opens.
Use import popups
If for some reason an import statement for a TypeScript symbol was not added on completion or editing, AppCode shows you a popup that suggests importing the symbol.
To accept the suggestion, press ⌥⏎:
If there's more than one possible source of import, AppCode informs you about that:
Pressing ⌥⏎ in this case opens a list of suggestions:
To hide import popups, open the Preferences dialog ⌃⌥S, go to , and clear the With auto-import tooltip checkbox.
Use import quick-fixes
If an import popup doesn't show up, you can always add an import statement via the dedicated quick-fix.
To generate an import, select Add import statement:
If there is only one source to import a symbol from, AppCode generates an import statement:
If there are several sources to import a symbol from, select the relevant one from the suggestion list:
If the TypeScript Language Service is enabled in your project, you can also use its suggestion:
If there are several sources to import a symbol from, select the relevant one from the list that the TypeScript Language Service shows:
Configure the appearance of import statements
In the Preferences dialog ⌃⌥S, go to , and use the controls in the Imports tab.
The documentation is shown in a Documentation popup that helps navigate to the related symbols via hyperlinks, and provides a toolbar for moving back and forth through the already navigated pages.
View documentation for a symbol
Position the caret at the symbol and press ⌃Q or selectfrom the main menu.
When you hover the mouse pointer over a symbol, AppCode immediately displays the reference for it in the Documentation popup.
You can turn off this behavior or configure the popup to appear faster or slower, see Configuring the behavior of Documentation popup below.
Configure the behavior of Documentation popup
To turn off showing documentation automatically, open the Preferences dialog ⌃⌥S, go to , and clear the Show quick documentation on mouse move checkbox.
To have the Documentation popup shown faster or slower, open the Preferences dialog ⌃⌥S, go to , then select the Show the documentation popup checkbox and specify the delay time.
View the MDN documentation for a symbol at caret
In the Documentation window ⌃Q, click the MDN link.
Alternatively, press ⇧F1 or choosefrom the main menu.
AppCode opens the MDN article in the default AppCode browser.
Parameter hints show the names of parameters in methods and functions to make your code easier to read. By default, parameter hints are shown only for values that are literals or function expressions but not for named objects.
Configure parameter hints
Open the Preferences dialog ⌃⌥S and go to .
Select Parameter hints from the list, make sure the Show parameter hints checkbox is selected, and then specify the context where you want parameter hints shown.
For some methods and functions, AppCode does not show parameter hints in any context. Click Exclude list... to view these methods and functions, possibly enable parameter hints for them, or add new items to the list.
Install the type declarations
Position the caret at the warning and press ⌥⏎.
Select the suggestion and press ⏎.
You can configure TypeScript-aware syntax highlighting according to your preferences and habits.
In the Preferences dialog ⌃⌥S, go to .
Select the color scheme, accept the highlighting settings inherited from defaults or customize them as described in Configuring colors and fonts.
You can quickly navigate through your TypeScript project in the AppCode editor using different actions and popups.
Go to declaration of a symbol
You can navigate from a variable, a field, a method, or any other symbol to its declaration or view the symbol definition in a popup without jumping anywhere from the code you are editing.
To jump to the declaration of a symbol, place the caret at a usage of the symbol and press ⌃B or selectfrom the main menu.
Alternatively, use Ctrl+Click: keeping Ctrl pressed, hover your mouse pointer over the symbol. When the symbol turns into a hyperlink, click the hyperlink without releasing Ctrl.
Go to usages of a symbol
You can view a list of usages of a symbol and select the one to jump to.
To get a list of usages of a symbol, place the caret at the declaration of the symbol and do one of the following:
Press ⌃B or selectfrom the main menu.
Press ⌃⌥F7 or selectfrom the main menu.
From the list, select the usage of the symbol where you want to jump.
Go to type declaration of a symbol
You can navigate from a variable, a field, a method, or any other symbol to its type declaration. Alternatively, open the type definition in a popup without jumping to the type declaration.
AppCode also shows the inferred type of an object. You can view the inferred type information in a tooltip or in the documentation popup.
Jump to type declaration
To jump from a symbol to the declaration of its type, place the caret at a usage of the symbol and press ⌃⇧B or selectfrom the main menu.
To view the type definition of a symbol in a popup, place the caret at the symbol for which you want to view the type definition and select.
For an instance of a class, this will reveal the class itself instead of where this instance is defined.
View inferred type information of a symbol
Hold Ctrl and hover the mouse pointer over the symbol.
Alternatively, hover the mouse pointer over a symbol. AppCode immediately displays the reference for it in the Documentation popup.
Learn more from Documentation look-up above.
Note the difference between app.ts with the following code:and . Suppose you have a file
dog.bark(), then brings you to the declaration of the variable in
let dog = new Dog (), while brings you to the declaration of the class
Navigate between subclasses, superclasses, overrides, and implementations
You can keep track of class implementations and overriding methods either using the gutter icons in the editor or pressing the appropriate shortcuts.
Go to a subclass
Press ⌃⌥B or click in the gutter and then select the relevant class from the list.
Alternatively, selectfrom the main menu or from the context menu and then select the relevant class from the list.
Go to a superclass or overridden method
Place the caret at a subclass and press ⌃U. AppCode brings you to the declaration of the superclass and positions the cursor at its name.
Click in the gutter next to an overriding method. AppCode brings you to the superclass with the cursor at the overridden method.
Alternatively, place the caret at the overriding method and press ⌃U or selectfrom the main menu or from the context menu.
Go to an interface or implemented method
Place the caret at an implementation of an interface, press ⌃U, and select the interface to go to.
AppCode brings you to the declaration of the interface and positions the cursor at its name.
Click in the gutter next to the implementing method. AppCode brings you to the corresponding interface with the cursor at the implemented method.
Alternatively, place the caret at the implementing method and press ⌃U or selectfrom the main menu or from the context menu.
Refactoring in TypeScript
AppCode provides both common refactoring procedures, such as rename/move, and so on, and TypeScript-specific refactoring procedures, such as change signature, introduce parameter, introduce variable. See Rename refactorings and Move Refactorings for details.
Run and debug your application
With AppCode, you can run and debug client-side TypeScript code and TypeScript code running in Node.js. Learn more from Running and debugging TypeScript.