# Code Inspection: Compare of float numbers with equality operator

Using the `==`

operator to compare floating-point numbers is, generally, a bad idea. The problem arises from the fact that, typically, results of calculations have to be ‘fitted’ into floating-point representation, which does not always match the perceived reality of what result should be produced.

For example, suppose you take a root of `-4`

using `var root = Complex.Sqrt(new Complex(-4, 0))`

. Then, you decide to ensure that the real part of the result is `0`

(zero), by asserting that `root.Real == 0.0`

. Unfortunately, the actual result of the calculation is (1.22460635382238E-16, 2), so the comparison will, predictably, fail.

In order to do these comparisons correctly, you need to specify a tolerance, that is, a value to indicate by how much the result can diverge from the intended value. Then, the comparison above can be rewritten, for example, as `Math.Abs(root.Real)< 1.E-10`

. Similarly, comparisons between two values can take the form of `Math.Abs(x - y)< tolerance`

. The tolerance value really depends on the precision of the calculations being performed but, in most cases, should be at least the *Epsilon* value ( `float.Epsilon`

, `double.Epsilon`

, and so on). The *Epsilon* is a constant that denotes the smallest non-zero value that can be represented with the type of floating number you are using. Please note that, in the majority of cases, the *Epsilon* value is too low to be used as a reliable tolerance value.