RubyMine 2016.2 Help

Running and Debugging Node.js

On this page:

Before you start

Install and enable the NodeJS plugin. The plugin is not bundled with RubyMine, but it can be installed from the JetBrains plugin repository as described in Installing, Updating and Uninstalling Repository Plugins and Enabling and Disabling Plugins.

Local and remote modes of running or debugging Node.js applications

Running a Node.js application in RubyMine is supported only in the local mode. This means that RubyMine itself starts the Node.js engine and the target application according to a run configuration and gets full control over the session.

Debugging can be performed in two modes:

  • Locally, with the Node.js engine started from RubyMine.
  • Remotely, when RubyMine connects to an already running Node.js application. This approach gives you the possibility to re-start a debugging session without re-starting the Node.js server.
In either case, the debugging session is initiated through a debug configuration

You can also configure the behaviour of the browser and enable debugging the client-side code of the application. This functionality is provided through a JavaScript Debug run configuration, so technically, RubyMine creates separate run configurations for the server-side and the client-side code, but you specify all your settings in one dedicated NodeJS run configuration.

Running a Node.js application

  1. Create a Node.js run configuration.
  2. To launch the application, select the run configuration from the list on the main tool bar and then choose Run | Run <configuration name> on the main menu or click the Run toolbar button run.png. The Run tool window opens.
  3. Open the browser of your choice and open the page with the URL address generated through the server.listen function based on the port and host parameters. The page shows the result of executing your Node.js application.

Debugging a Node.js application locally

  1. Set the breakpoints in the Node.js code, where necessary. At least one breakpoint is necessary otherwise the program will be just executed. If you want the debugging tool to stop at the first line of your code, set a breakpoint at the first line.
  2. Create a Node.js run/debug configuration.
  3. To start a debugging session, select the required debug configuration from the list on the main tool bar and then choose Run | Debug <configuration name> on the main menu or click the Debug toolbar button debug.png.
  4. Open the browser of your choice and open the starting page of your application. Control over the debugging session returns to RubyMine.
  5. Switch to RubyMine, where the controls of the Debug tool window are now enabled. Proceed with the debugging session step through the breakpoints, switch between frames, change values on-the-fly, examine a suspended program, evaluate expressions, and set watches.

Debugging a running Node.js application

With RubyMine, you can connect to an already running Node.js applications. The application can be started either on the same machine or on a physically remote host.

When the application to debug is running on a physically remote host, you need to run a proxy or any other software that ensures port forwarding on the Node.js server. This is necessary because the debug port can open only on the localhost network interface. The localhost network interface cannot be accessed from another machine therefore RubyMine cannot connect to it upon initiating a debugging session.

  1. Make sure the application to debug has been launched in the target environment with the following parameters: --debug-brk=<port through which the debugger on the remote host interacts with the network interface which accepts external connections>

    Please note the following:

    • With the --debug-brk option, the execution of the application suspends right after launch. This option allows you to debug the code executed on start.
    • With the --debug option, the code that has to be executed on the application start is executed whereupon the application waits for a debugger to connect to it. This option is useful when you are not going to debug Node.js right now, but you want to debug it later.
  2. Create a Node.js Remote Debug configuration: in the Debug port text box, type the port number through which you will interact with the remote host according to the server access configuration, see Creating a Remote Server Configuration.
  3. With the application still running, launch the Node.js Remote Debug configuration (select the configuration in the list and click the Debug toolbar button debug.png).
  4. In the Run tool window, copy the URL address of the server and open the corresponding page in the browser. Control over the debugging session returns to RubyMine.
  5. Switch to RubyMine. In the Debug tool window, step through the breakpoints, switch between frames, change values on-the-fly, examine a suspended program, evaluate expressions, and set watches.

Creating a Node.js run/debug configuration

  1. Choose Run | Edit Configuration on the main menu. Alternatively, click Shift+Alt+F10 and select Edit Configuration from the pop-up menu.
  2. In the Edit Configuration dialog box that opens, click the Add New Configuration toolbar button add.png, and choose Node.js on the context menu.
  3. In the Run/Debug Configuration: Node.js dialog box, that opens, specify the following:
    • The name of the configuration.
    • In the Node Interpreter field, specify the Node.js installation to use. Choose the local or remote interpreter from the drop-down list, or click browseButton and choose the interpreter in the dialog box that opens, or configure an interpreter as described in Configuring Node.js Interpreters.
    • To enable remote debugging of the application, specify the following option in the Node parameters text box: --debug-brk=<port for connect to debugger remotely>
      • With the --debug-brk option, the execution of the application suspends right after launch. This option allows you to debug the code executed on start.
      • With the --debug option, the code that has to be executed on the application start is executed whereupon the application waits for a debugger to connect to it. This option is useful when you are not going to debug Node.js right now, but you want to debug it later.
    • In the JavaScript File field, specify the location of the file to start running the Node.js application from.
    • If the file to run references any other files, specify their location in the Working directory field.
    • If applicable, in the Application parameters text box, specify the arguments to be passed to the application on start through the process.argv array.
  4. If necessary, configure the behaviour of the browser and enable debugging the client-side code of the application. This functionality is provided through a JavaScript Debug run configuration, so technically, RubyMine creates separate run configurations for the server-side and the client-side code, but you specify all your settings in one dedicated NodeJS run configuration.
  5. Click OK, when ready.

Enabling Live Editing during a Node.js debugging session

You can configure the behaviour of the browser and enable debugging the client-side code of the application. This functionality is provided through a JavaScript Debug run configuration, so technically, RubyMine creates separate run configurations for the server-side and the client-side code, but you specify all your settings in one dedicated NodeJS run configuration.

  1. Choose Run | Edit Configuration on the main menu. Alternatively, click Shift+Alt+F10 and select Edit Configuration from the pop-up menu.
  2. From the list, choose the Node.js run configuration to activate the Live Edit functionality in. In the dialog box that opens, switch to the Browser / Live Edit tab.
  3. Select the After launch check box to have a browser started automatically after a debugging session is launched. Specify the browser to use in the drop-down list next to the check box.
    • To use the system default browser, choose Default.
    • To use a custom browser, choose it from the list. Note that Live Edit is fully supported only in Chrome.
    • To configure browsers, click the Browse button browseButton and adjust the settings in the Web Browsers dialog box that opens. For more information, see Configuring Browsers.
  4. Select the With JavaScript debugger check box to enable the JavaScript debugger in the selected browser and specify the URL address to open the application at.

Creating a Node.js remote debug configuration.

  1. On the main menu, choose Run | Edit Configurations.
  2. In the Edit Configuration dialog box, that opens, click the Add New Configuration toolbar button add.png, and choose Node.js Remote Debug on the context menu.
  3. In the Run/Debug Configuration: Node.js Remote Debug dialog box, that opens, specify the following:
    • The name of the configuration.
    • The host where the target application is running.
    • The port to connect to. Copy the port number from the information message in the Run tool window that controls the running application.
  4. Click OK, when ready.

Node.js multiprocess debugging

RubyMine supports debugging additional Node.js processes that are launched by the child_process.fork() method or by the cluster module. Such processes are shown as threads in the Frame pane on the Debugger tab of the Debug Tool Window.

  1. Set the breakpoints in the processes to debug.
  2. Create a Node.js run/debug configuration.
  3. Choose the newly created configuration in the Select run/debug configuration drop-down list on the tool bar and click the Debug toolbar button debug.

    The Debug tool window opens and the Frames drop-down list shows the additional processes as threads as soon as they are launched:

    ws_node_multiprocess.png

    To examine the data (variables, watches, etc.) for a process, select its thread in the list and view its data in the Variables and Debug Tool Window. Watches panes. When you select another process, the contents of the panes are updated accordingly.

See Also

Last modified: 30 November 2016