Setting up and Running Additional Build Agents
Before you can start customizing projects and creating build configurations, you need to configure build agents. Review the agent-server communication and Prerequisites sections before proceeding with agent installation.
Necessary OS and environment permissions
Before the installation, review the Conflicting Software section. In case of any issues, make sure no conflicting software is used.
Note that to run a TeamCity build agent, the environment and user account used to run the Agent need to comply with the following requirements:
The agent process (Java) must:
be able to open outbound HTTP connections to the server URL configured via the
serverUrlproperty in the
buildAgent.propertiesfile (typically the same address you use in the browser to view the TeamCity UI). Sending requests to the paths under the configured URL should not be limited. See also the recommended reverse proxy settings. Ensure that any firewalls installed on the agent or server machines, network configuration and proxies (if any) comply with these requirements.
have full permissions (read/write/delete) to the following directories recursively:
<agent home>(necessary for automatic agent upgrade and agent tools support),
<agent temp>, and agent system directory (set by
systemDirparameters in the
be able to launch processes (to run builds).
be able to launch nested processes with the following parent process exit (this is used during agent upgrade).
Log on as a service (to run as Windows service)
Start/Stop service (to run as Windows service, necessary for the agent upgrade to work, see also Microsoft KB article)
Debug programs (required for take process dump functionality)
Reboot the machine (required for agent reboot functionality)
The user must be able to run the
shutdowncommand (for the agent machine reboot functionality and the machine shutdown functionality when running in a cloud environment)
If you are using
systemd, it should not kill the processes on the main process exit (use
The build process is launched by a TeamCity agent and thus shares the environment and is executed under the OS user used by the TeamCity agent. Ensure that the TeamCity agent is configured accordingly. See Known Issues for related Windows Service Limitations.
Agent-Server Data Transfers
A TeamCity agent connects to the TeamCity server via the URL configured as the
serverUrl agent property. This is called unidirectional agent-to-server connection. If specifically configured, TeamCity agent can use legacy bidirectional communication which also requires establishing a connection from the server to the agents. To view whether the agent-server communication is unidirectional or bidirectional for a particular agent, navigate to Agents | <Agent Name> | Agent Summary tab, the Details section, Communication Protocol.
Unidirectional Agent-to-Server Communication
Agents use unidirectional agent-to-server connection via the polling protocol: the agent establishes an HTTP(S) connection to the TeamCity Server, and polls the server periodically for server commands.
It is recommended to use HTTPS for agent to server communications (check related server configuration notes). If the agents and the server are deployed into a secure environment, agents can be configured to use plain HTTP URL for connections to the server as this reduces transfer overhead. Note that the data travelling through the connection established from an agent to the server includes build settings, repository access credentials and keys, repository sources, build artifacts, build progress messages and build log. In case of using the HTTP protocol that data can be compromised via the "man in the middle" attack.
The bidirectional communication is a legacy connection between the agent and the server and it needs to be specifically enabled (see the example below). When enabled, it requires the agent to connect to the server via HTTP (or HTTPS) and the server to connect to the agent via HTTP.
The data that is transferred via the connections established by the server to agents is passed via an unsecured HTTP channel and thus is potentially exposed to any third party that may listen to the traffic between the server and the agents. Moreover, since the agent and server can send "commands" to each other, an attacker that can send HTTP requests and capture responses may in theory trick the agent into executing an arbitrary command and perform other actions with a security impact.
The communication protocol used by TeamCity agents is determined by the value of the
teamcity.agent.communicationProtocols server internal property. The property accepts a comma-separated ordered list of protocols (
xml-rpc are supported protocol names) and is set to
teamcity.agent.communicationProtocols=polling by default. If several protocols are specified, the agent tries to connect using the first protocol from this list and if it fails, it will try to connect via the second protocol in the list.
polling means unidirectional protocol,
xml-rpc - older, bidirectional communication.
Changing Communication Protocol
To change the communication protocol for all agents, set the TeamCity server
teamcity.agent.communicationProtocolsserver internal property. The new setting will be used by all agents which will connect to the server after the change. To change the protocol for the existing connections, restart the TeamCity server.
By default, the agent's property is not configured; when the agent first connects to the server, it receives it from the TeamCity server. To change the protocol for an individual agent after the initial agent configuration, change the value of the
teamcity.agent.communicationProtocolsproperty in the agent's properties. The agent's property overrides the server property. After the change the agent will restart automatically upon finishing a running build, if any.
When connecting TeamCity agents of version 2018.1+ to TeamCity server of version before 9.1 (e.g. after roll back following an upgrade), the agents will need to be updated to use
xml-rpcprotocol (or they can be reinstalled) to be able to connect to an older server to perform the self-update procedure.
Installing Additional Build Agents
1. Install a build agent using any of the following options:
using Windows installer (Windows only)
by downloading a ZIP file and installing manually (any platform): minimal and full-packed ZIP archives ara available
2. After installation, configure the agent specifying its name and the address of the TeamCity server in the
When the newly installed agent connects to the server for the first time, it appears on the
Unauthorized agents tab visible to administrators/users with the permissions to authorize it. Agents will not run builds until they are authorized in the TeamCity web UI. The agent running on the same computer as the server is authorized by default.
The number of authorized agents is limited by the number of agents licenses on the server. See more under Licensing Policy.
Installing via Windows installer
In the TeamCity web UI, navigate to the Agents tab.
Click the Install Build Agents link and select Windows Installer to download the installer.
On the agent, run the
agentInstaller.exeWindows Installer and follow the installation instructions.
Installing via Docker Agent Image
In the TeamCity web UI, navigate to the Agents tab.
Click the Install Build Agents link and select Docker Agent Image.
Follow the instructions on the opened page.
Installing via ZIP File
Make sure a JDK (JRE) 1.8.0_161 or later (Java 6-10 are supported, but 1.8.0_161+ is recommended) is properly installed on the agent computer.
On the agent computer, make sure the
JAVA_HOMEenvironment variables are set (pointing to the installed JRE or JDK directory respectively).
In the TeamCity web UI, navigate to the Agents tab.
- Click the Install Build Agents link and select one of the two options to download the archive:
Minimal ZIP file distribution: a regular build agent with no plugins
(since TeamCity 2020.1) Full ZIP file distribution*: a full build agent prepacked with all plugins currently enabled on the server
Extract the downloaded file into the desired directory.
Navigate to the
<installation path>\confdirectory, locate the file called
buildAgent.dist.propertiesand rename it to
buildAgent.propertiesfile to specify the TeamCity server URL (HTTPS is recommended, see the notes) and the name of the agent. Refer to the Build Agent Configuration page for details on agent configuration.
Under Linux, you may need to give execution permissions to the
On Windows, you may also want to install the build agent Windows service instead of using the manual agent startup.
Installing via Agent Push
TeamCity provides the Agent Push functionality that allows installing a build agent to a remote host. Currently, supported combinations of the server host platform and targets for build agents are:
from the Unix-based TeamCity server, build agents can be installed to Unix hosts only (via SSH)
from the Windows-based TeamCity server, build agents can be installed to Unix (via SSH) or Windows (via psexec) hosts
Remote Host Requirements
There are several requirements for the remote host:
You can test the connection with the following commands:
net use \\target\Admin$ /user:Administrator dir \\target\Admin$
In the TeamCity Server web UI navigate to the Agents | Agent Push tab, and click Install Agent.
If you are going to use same settings for several target hosts, you can create a preset with these settings and use it each time when installing an agent to another remote host.
In the Install agent dialog, either select a saved preset or choose "Use custom settings", specify the target host platform, and configure corresponding settings. Agent Push to a Linux system via SSH supports custom ports (the default is 22) specified as the SSH port parameter. The port specified in a preset can be overridden in the host name (for example,
hostname.domain:2222), during the actual agent installation.
You may need to download
Sysinternals psexec.exe, in which case you will see the corresponding warning and a link to the Administration | Tools page where you can download it.
Starting the Build Agent
TeamCity build agents can be started manually or configured to start automatically.
To start the agent manually, run the following script:
<installation path>\bin\agent.bat start
for Linux and macOS:
<installation path>\bin\agent.sh start
To configure the agent to be started automatically, see the corresponding sections:
Linux: configure daemon process with the
agent.sh startcommand to start it and the
agent.sh stopcommand to stop it.
Automatic Agent Start under Windows
To run an agent automatically on the machine boot under Windows, you can either set up the agent to be run as a Windows service or use another way of the automatic process start.
Using the Windows service approach is the easiest way, but Windows applies some constraints to the processes run this way.
A TeamCity agent works reliably under Windows service provided all the requirements are met, but is often not the case for the build processes configured to be run on the agent.
That is why it is recommended to run a TeamCity agent as a Windows service only if all the build scripts support this. Otherwise, it is advised to use alternative OS-specific ways to start a TeamCity agent automatically.
One of the ways is to configure an automatic user logon on Windows start and then configure the TeamCity agent start (via
agent.bat start) on the user logon (for example, via Windows Task Scheduler).
Build Agent as a Windows Service
In Windows, you may want to run TeamCity agent as a Windows service to allow it running without any user logged on. If you use the Windows agent installer, you have an option to install the service in the installation wizard.
The following instructions can be used to install the Windows service manually (for example, after
.zip agent installation). This procedure should also be performed to create Windows services for the second and following agents on the same machine.
To install the service:
Check if the service with the required name and id (see #4 below, service name is
TeamCity Build Agentby default) is not present; if installed, remove it.
Check that the
wrapper.java.commandproperty in the
<agent home>\launcher\conf\wrapper.conffile contains a valid path to the Java executable in the JDK installation directory. You can use
wrapper.java.command=../jre/bin/javafor the agent installed with the Windows distribution. Make sure to specify the path of the java.exe file without any quotes.
If you want to run the agent under user account (recommended) and not "System", add the
wrapper.ntservice.passwordproperties to the
<agent home>\launcher\conf\wrapper.conffile with appropriate credentials
(for second and following installations) modify the
<agent>\launcher\conf\wrapper.conffile so that the
wrapper.ntservice.descriptionproperties have unique values within the computer.
<agent home>\bin\service.install.batscript under a user with sufficient privileges to register the new agent service. Make sure to start the agent for the first time only after it is configured as described.
To start the service:
<agent home>/bin/service.start.bat(or use standard Windows Services applet)
To stop the service:
<agent home>/bin/service.stop.bat(or use standard Windows Services applet)
You can also use the standard Windows
net.exe utility to manage the service once it is installed.
For example (assuming the default service name):
<agent home>\launcher\conf\wrapper.conf file can also be used to alter the agent JVM parameters.
The user account used to run the build agent service must have enough rights to start/stop the agent service, as described above.
Automatic Agent Start under Linux
To run an agent automatically on the machine boot under Linux, configure a daemon process with the
agent.sh start command to start it and
agent.sh stop command to stop it.
For systemd, see the example
teamcityagent.service configuration file:
init.d, refer to an example procedure:
1. Navigate to the services start/stop services scripts directory:
2. Open the build agent service script:
3. Paste the following into the file :
4. Set the permissions to execute the file:
5. Make links to start the agent service on the machine boot and on restarts using the appropriate tool:
For Red Hat/CentOS:
Automatic Agent Start under macOS
For macOS, TeamCity provides the ability to load a build agent automatically when a build user logs in.
To configure an automatic build agent startup via
LaunchAgent, follow these steps:
1. Install a build agent on a Mac via
2. Prepare the
conf/buildAgent.properties file (set agent name there, at least).
3. Make sure that all files under the
buildAgent directory are owned by
your_build_user to ensure a proper agent upgrade process.
4. Load the build agent via the command:
Run these commands under the
Wait several minutes for the build agent to auto-upgrade from the TeamCity server. You can watch the process in the logs:
5. When the build agent upgrades and successfully connects to TeamCity server, stop the agent:
6. After the build agent upgrades from the TeamCity server, copy the
buildAgent/bin/jetbrains.teamcity.BuildAgent.plist file to the
$HOME/Library/LaunchAgents/ directory. If you don't want TeamCity to start under the root permissions, specify the UserName key in the
.plist file, for example:
7. Configure your Mac system to automatically login as a build user, as described here.
On the system startup, the build user should automatically log in, and the build agent should start.
To quickly check that the build agent is running, use the following command:
Stopping the Build Agent
To stop the agent manually, run the
<Agent home>\agent script with a
stop to request stopping after the current build finished.
stop force to request an immediate stop (if a build is running on the agent, it will be stopped abruptly (canceled)).
Under Linux, you have one more option top use
stop kill to kill the agent process.
If the agent runs with a console attached, you may also press Ctrl+C in the console to stop the agent (if a build is running, it will be canceled).
Stopping the Agent Service on Mac OS
If a build agent has been started as a
LaunchAgent service, it can be stopped using the
A TeamCity build agent is a Java application (supported Java versions).
A build agent contains two processes:
Agent Launcher – a Java process that launches the agent process
Agent – the main process for a Build Agent; runs as a child process for the agent launcher
.exe TeamCity distribution comes bundled with 64-bit Amazon Corretto 8.
If you run a previous version of the TeamCity agent, you will need to repeat the agent installation to update the JVM.
Using 64-bit JDK (not JRE) is recommended. JDK is required for some build runners like IntelliJ IDEA Project, Java Inspections, and Duplicates. If you do not have Java builds, you can install JRE instead of JDK.
Using of x64 bit Java is possible, but you might need to double the
-Xmx memory value for the main agent process (see Configuring Build Agent Startup Properties and alike section for the server).
.zip agent installation you need to install the appropriate Java version. Make it available via
PATH or available in one of the following places:
in the directory pointed to by the
JRE_HOMEenvironment variables (check that you only have one of the variables defined).
if you plan to run the agent via Windows service, make sure to set the
wrapper.java.commandproperty in the
<agent home>\launcher\conf\wrapper.conffile to a valid path to the Java executable
Upgrading Java on Agents
If you are trying to launch an agent, and it is not able to find the required Java version (currently Java 6) in any of the default locations, the agent will report an error on starting, the process will not launch, and the agent will be shown as disconnected in the TeamCity UI.
If a build agent uses a Java version older than Java 8, you will see the corresponding warning on the agent's page and a health item in the web UI.
To update Java on agents, do one of the following:
If the agent details page in the TeamCity UI displays a Java version note with the corresponding action, you can switch to using newer Java: if the appropriate Java version of the same bitness as the current one is detected on the agent, the agent page provides an action to switch to using that Java automatically. Upon the action invocation, the agent process is restarted (once the agent becomes idle, i.e. finishes the current build if there is one) using the new Java.
(Windows) Since the build agent Windows installer comes bundled with the required Java, you can just manually reinstall the agent using the Windows installer (
.exe) obtained from the TeamCity server Agents page. See installation instructions. It is important to uninstall the previous version of the agent before installing the updated agent: invoke
Uninstall.exein the agent home directory, clear all the "Remove..." checkboxes, and click Uninstall.
Install a required Java on the agent into one of the standard locations, and restart the agent - the agent should then detect it and provide an action to use a newer Java in the web UI (see above).
Install a required Java on the agent and configure the agent to use it.
Installing Several Build Agents on the Same Machine
You can install several TeamCity agents on the same machine if the machine is capable of running several builds at the same time. However, we recommend running a single agent per (virtual) machine to minimize builds cross-influence and making builds more predictable. When installing several agents, it is recommended to install them under different OS users so that user-level resources (like Maven/Gradle/NuGet local artifact caches) do not conflict.
TeamCity treats all agents equally regardless of whether they are installed on the same or on different machines.
When installing several TeamCity build agents on the same machine, consider the following:
The builds running on such agents should not conflict by any resource (common disk directories, OS processes, OS temp directories).
Depending on the hardware and the builds' specifics, you may experience degraded building performance. Ensure there are no disk, memory, or CPU bottlenecks when several builds are run at the same time.
Preferably, agents should run under different OS users.
After having one agent installed, you can install additional agents by following the regular installation procedure (see an exception for the Windows service below), but make sure that:
The agents are installed in separate directories.
The agents have the distinctive
tempDirdirectories in the
Values for the
Usually, for a new agent installation you can just copy the directory of the existing agent to a new place except its
system directories. Then, modify
conf/buildAgent.properties with the new
ownPort values. Clear (delete or remove the value) the
authorizationToken property and make sure the
tempDir are relative/do not clash with another agent.
Configuring second build agent on macOS
If you want to start several build agents on macOS, repeat the procedure of installing and starting build agent with the following changes:
Install the second build agent in a different directory.
conf/buildAgent.properties, specify a different agent name.
- Do not run
Create a copy of the
- Edit the
$HOME/Library/LaunchAgents/jetbrains.teamcity.BuildAgent2.plistfile and set the following parameters:
WorkingDirectoryparameter to the correct path to the second build agent home
Start the second agent with the command
launchctl load $HOME/Library/LaunchAgents/jetbrains.teamcity.BuildAgent2.plist.
To check that both build agents are running, use the following command:
Configuring second build agent on Windows
If you use Windows installer to install additional agents and want to run the agent as a service, you will need to perform manual steps as installing second agent as a service on the same machine is not supported by the installer: the existing service is overwritten (see also a feature request).
In order to install the second agent, it is recommended to install the second agent manually (using
.zip agent distribution). You can use the Windows agent installer and do not opt for service installation, but you will lose uninstall option for the initially installed agent this way.
After the second agent is installed, register a new service for it as mentioned in the section above.