TeamCity supports upgrades from any of the previous versions to the later ones. All the settings and data are preserved unless noted in the Upgrade Notes.
It is recommended to plan for regular upgrades to run the latest TeamCity version at least after several bugfix updates are released. This way you run a fully supported version with the latest fixes and security patches.
Before upgrading TeamCity:
For a major upgrade, review what you will be getting in What's New (follow the links at the bottom of What's New if you are upgrading not from the previous major release).
Check your license keys unless you are upgrading within bugfix releases of the same major
Carefully review the Upgrade Notes.
Consider probing the upgrade on a test server
If you have non-bundled plugins installed, check plugin pages for compatibility with the new version and upgrade/uninstall the plugins if necessary
To upgrade the server:
Back up the current TeamCity data including settings, database, and supplementary data. You will need the backup to roll back to the previous version in the unlikely event of the upgrade failure.
- Perform the upgrade steps:
If you plan to upgrade a production TeamCity installation, it is recommended to install a test server and check its functioning in your environment before upgrading the main one.
Before upgrading, make sure the maintenance period of your licenses is not yet elapsed (use the Administration | Licenses web UI page to see your license keys). The licenses are valid only for the versions of TeamCity with the effective release date within the maintenance period. Check the effective release date on the release list.
Typically all the minor updates (indicated by changes in the
M part of the
YYYY.N.M TeamCity version) use the same effective release date (that of the major release).
If not all the licenses cover the target version release date, consider renewing the licenses before the upgrade (you can replace the old license keys with the renewed ones even before the upgrade).
If you are only evaluating a newer version, you can get an evaluation license on the download page. Note that each TeamCity version can be evaluated only once. To extend the evaluation period, contact the JetBrains sales department.
When upgrading from TeamCity 4.x or earlier, note that the licensing policy in TeamCity versions 5.0 and later are different from that of the previous TeamCity versions. Review the Licensing Policy page and the Licensing and Upgrade section on the official site.
Upgrading TeamCity Server
TeamCity supports upgrades from any of the previous versions to the current one.
Unless specifically noted, downgrades with preserving the data are not possible with changing the major version and are possible within bugfix releases.
The general policy is that bugfix updates (indicated by changes in the
M part of the
YYYY.N.M TeamCity version) do not change data format, so you can freely upgrade/downgrade within the bugfix versions. However, when upgrading to the next major version (changed
YYYY.N), you will not be able to downgrade with the data preservation: you will need to restore a backup of the appropriate version. Read more about the release numbering.
On upgrade, all the TeamCity configuration settings and other data are preserved unless noted in Upgrade Notes. If you have customized TeamCity installation (like Tomcat server settings change), you will need to repeat the customization after the upgrade.
The general approach to upgrade is to remove all the files of the previous installation in the TeamCity server home and place the new files into the same location. Make sure to preserve the TeamCity Data Directory and the database intact (making a backup beforehand), backing up and restoring previously customized settings (for example, in
...\conf\web.xml files) is also necessary. The logs directory (
...\logs) can be left with the old installation files.
Agents connected to the server are upgraded automatically.
If you accidentally performed an inconsistent upgrade, check the recovery instructions.
To be able to update automatically, the TeamCity server should be able to contact https://www.jetbrains.com site.
When a new version of TeamCity is detected, the server displays the corresponding health item for system administrators. The item points to the server's Administration | Updates page, where all the versions available for the update are listed. The page contains notes about licenses compatibility, the new version description and controls to perform the automatic upgrade if you want to use that instead of performing the manual updating procedure.
The automatic update procedure is as follows:
The TeamCity server is stopped.
- The update script is run to do the following:
Create a backup of the current installation in the <TeamCity Home Directory>/.old directory.
Update the stopped server to the new version.
Next, the updated server starts.
The update progress is logged to the <TeamCity Home Directory>/logs/teamcity-update.log file.
Current automatic update limitations:
some customizations, for example, installations with changed server context, are not supported by automatic update
only manual upgrade is possible if the server runs under the official TeamCity Docker container, started with Azure Resource Manager template.
the Windows uninstaller is not updated during the upgrade, so after several updates, old TeamCity version will still be noted in Windows lists. During the uninstallation, not all of the TeamCity installation files might be deleted.
the bundled Java is not updated
in a multinode setup, only the main TeamCity server can be auto-updated, the secondary nodes need to be updated manually.
Using Windows Installer
Note the username used to run the TeamCity server. You will need it during the new version installation.
If you have any of the Windows service settings customized, store them to repeat the customizations later.
Note if you are using 64 bit Java to run the service (for example, check for "64" in "Java VM info" on the server's Administration | Diagnostics or in a thread dump), consider backing up <TeamCity Home Directory>\jre directory.
(optional as these will not be overwritten by the upgrade) If you have any customizations of the bundled Tomcat server (like port, https protocol, and so on), JRE, etc. Backup those to repeat the customizations later.
Note if you have local agent installed (though, it is not recommended to have a local agent) so that you can select the same option in the installer.
Run the new installer and point it to the same place TeamCity is installed into ( the location used for installation is remembered automatically). Confirm uninstalling the previous installation. The TeamCity uninstaller ensures proper uninstallation, but you might want to make sure the TeamCity server installation directory does not contain any non-customized files after uninstallation finishes. If there are any, backup/remove them before proceeding with the installation.
If prompted, specify the <TeamCity Data Directory>/ used by the previous installation.
(Optional as these will not be overwritten by the upgrade) Make sure you have the external database driver installed (this applies only if you use an external database).
Check and restore any customizations of Windows services and Tomcat configuration that you need. When upgrading from versions 7.1 and earlier, make sure to transfer the server memory setting to the environment variables.
If you use a customized Log4j configuration in the
conf\teamcity-server-log4j.xmlfile and want to preserve it (note, however, that customizing the file is actually not recommended, use logging presets instead), compare and merge
conf\teamcity-server-log4j.xml.backupcreated by the installer from the existing copy with the default file saved with the default name. Compare the
conf\teamcity-*-log4j.xml.distfile with the corresponding
conf\teamcity-*-log4j.xmlfile and make sure that
.xmlfile contains all the
.distfile defaults. It is recommended to copy the
.distfile over to the corresponding
.xmlfile until you really need the changed logging configuration.
Start up the TeamCity server (and agent, if it was installed together with the installer).
Review the TeamCity Maintenance Mode page to make sure there are no problems encountered, and confirm the upgrade by clicking the corresponding button. Only after that all data will be converted to the newer format.
If you encounter errors which cannot be resolved, make sure old TeamCity is not running/does not start on boot, restart the machine, and repeat the installation procedure.
Manual Upgrading using .tar.gz Distributions
Backup files customized since previous installation (most probably
Remove old installation files (the entire
<TeamCity Home Directory>). It's advised to backup the directory beforehand.
Unpack the new archive to the location where TeamCity was previously installed.
If you use a Tomcat server (your own or bundled in .tar.gz TeamCity distribution), it is recommended to delete the content of the
workdirectory. Note that this may affect other web applications deployed into the same web server.
Restore customized settings backed up in step 2 above. If you have the customized
[TOMCAT_HOME]/conf/server.xmlfile, apply your changes into the appropriate sections of the default file.
Make sure the previously configured TeamCity server startup properties (if any) are still actual.
Start up the TeamCity server.
Review the TeamCity Maintenance Mode page to make sure there are no problems encountered, and confirm the upgrade by clicking the corresponding button. Only after that, all the configuration data and database scheme are updated by TeamCity converters.
Upgrading TeamCity started from Docker images
If you made no changes to the container, you can just stop the running container, pull the new version of the official TeamCity image and the server in it via the usual command. If you changed the image, you will need to replicate the changes to the new TeamCity server image.
It is recommended for all users to regularly update their IDE plugins to the latest version compatible with the TeamCity server version in use. At least to the version available from the TeamCity server's Tools section on user profile.
Generally, versions of the IntelliJ IDEA TeamCity plugin, Eclipse TeamCity plugin, and Visual Studio TeamCity Addin have to be the same as the TeamCity server version. Users with non-matching plugin versions get a message on an attempt to log in to the TeamCity server with a non-matching version.
The only exception is TeamCity versions 9.0 - 9.1.x, which use a compatible protocol, and any plugin of these versions can be used with any server of these versions. Updating IDE plugins to the matching server version is still recommended.
Upgrading Build Agents
- Automatic Build Agent Upgrading
- Upgrading Build Agents Manually
Automatic Build Agent Upgrading
On starting TeamCity server (and updating agent distribution or plugins on the server), TeamCity agents connected to the server and correctly installed are automatically updated to the version corresponding to the server. This occurs for both server upgrades and downgrades. If there is a running build on the agent, the build finishes. No new builds are started on the agent unless the agent is up to date with the server.
Since TeamCity 2018.2, before starting the agent upgrade, the agent is checked for free disk space, 3 gb by default. To modify the value required for the upgrade, configure the
teamcity.agent.upgrade.ensure.free.space agent property.
The agent update procedure is as follows: The agent (
agent.sh, or agent service) will download the current agent package from the TeamCity server. When the download is complete and the agent is idle, it will start the upgrade process (the agent is stopped, the agent files are updated, and the agent is restarted). This process may take several minutes depending on the agent hardware and network bandwidth. Do not interrupt the upgrade process, as doing so may cause the upgrade to fail and you will need to manually reinstall the agent.
If you see that an agent is identified as "Agent disconnected (Will upgrade)" in the TeamCity web UI, do not close the agent console or restart the agent process, but wait for several minutes.
Various console windows can open and close during the agent upgrade. Please be patient and do not interrupt the process until the agent upgrade is finished.
Upgrading Build Agents Manually
All connected agents upgrade automatically, provided they are correctly installed, so manual upgrade is not necessary.
If you need to upgrade agent manually, you can follow the steps below:
As TeamCity agent does not hold any unique information, the easiest way to upgrade an agent if to
back up the
uninstall/delete existing agent.
install the new agent version.
restore the previously saved
buildAgent.propertiesfile to the same location.
start the agent.
If you need to preserve all the agent data (for example, to eliminate clean checkouts after the upgrade), you can:
stop the agent.
delete all the directories in the agent installation present in the agent
.zipdistribution to the agent installation directory, skipping the "conf" directory.
start the agent.
In the latter case, if you run the agent under Windows using a service, you may also need to upgrade the Windows service as described below.
Upgrading the Build Agent Windows Service Wrapper
Upgrading from TeamCity version 1.x
Version 2.0 of TeamCity migrated to the new way of managing Windows service (service wrapper) for the build agent: Java Service Wrapper library.
One of the advantages of using the new service wrapper is the ability to change any JVM parameters of the build agent process.
1.x versions installed Windows service under the name of agentd, while 2.x versions use the TeamCity Build Agent Service <build number> name.
The service wrapper will not be migrated to the new version automatically. You do not need to use the new service wrapper unless you need its functionality (like changing the agent's JVM parameters).
To use the new service wrapper, uninstall the old version of the agent (with Control Panel | Add/Remove Programs) and then install a new one.
If you customized the user under which the service is started, do not forget to customize it in the newly installed service.
Upgrading from TeamCity version 2.x
If the service wrapper needs an update, the new version is downloaded into the
<agent>/launcher.latest folder, however the changes are not applied automatically.
To upgrade the service wrapper manually, do the following:
Stop the service using
Uninstall the service using
<agent>/launcher/conf/wrapper.conffile. Check that the
wrapper.java.commandproperty points to the
java.exefile. Leave it blank to use the registry to look up java. Leave 'java.exe' to look up
PATH. For a standalone agent, the service value should be
../jre/bin/java, for an agent installation on the server the value should be
../../jre/bin/java. The backup version of the
wrapper.conffile can be used.
Install the service using
Make sure the service is running under the proper user account. Please note that using SYSTEM can result in failing builds which use MSBuild/Sln2005 configurations.
Start the service using