TeamCity Cloud 2024.03 Help

Configuring General Settings

General Build Configuration Settings

When creating a build configuration, specify the following settings:

Setting

Description

Name

The build configuration name.

Build Configuration ID

A unique ID of the configuration across all build configurations and templates in the system automatically generated from the build configuration name, but can also be set manually.
Make sure you give a globally unique id to the build configuration and prefix it with the project ID.
After a build configuration is created, its ID can be changed, and it is highly recommended to make corresponding changes to the bookmarked links to the web UI and calls to REST API using the ID.

Description

An optional description for the build configuration.

Build Number Format

A pattern which is resolved and assigned to the build number on the build start.

Build Counter

Specify the counter to be used in build numbering. Each build increases the build counter by 1. Use the Reset link to restore the counter value to 1.

Publish Artifacts

Select when to publish artifacts:

  • "Even if build fails" (default): publish artifacts at the last step of a build if all previous steps have been completed, successfully or not.

  • "Only if build status is successful": publish artifacts at the last step of a build if all previous steps have been completed successfully. TeamCity checks the current build status on the server before publishing artifacts.

  • "Always, even if build stop command was issued": publish artifacts for all builds, even for interrupted ones (for example, after the stop command was issued or after the time-out, specified in the build failure conditions).

This setting does not affect artifacts publishing configured in a build script.

Artifact Paths

Patterns to define artifacts of a build. After the first build is run, you can browse the agent checkout directory to configure artifacts paths.

Build Options

Specify additional options for the builds of this build configuration.

Build Number Format

In the Build number format field you can specify a pattern which is resolved and assigned to the build number on the build start.

The following substitutions are supported in the pattern:

Pattern

Description

%build.counter%

The build counter unique for each build configuration. It is maintained by TeamCity and will resolve to a next integer value on each new build start. The current value of the counter can be edited in the Build counter field.

%build.vcs.number.<VCS_root_name>%

The revision used for the build of the VCS root with <VCS_root_name> name. Read more on the property.

%property.name%

A value of the build property with the corresponding name. All the Predefined Build Parameters are supported (including Reference-only server properties).

Though not required, it is still highly recommended ensuring the build numbers are unique. Please include the build counter in the build number and do not reset the build counter to lesser values. It is also possible to change the build number from within your build script. For details, refer to Build Script Interaction with TeamCity.

Artifact Paths

Build artifacts are files produced by the build which are stored on TeamCity server and can be downloaded from the TeamCity UI or used as artifact dependencies by other builds. On the General Settings page of the build configuration, you can specify patterns for the files on the agent which will be uploaded to the server after the build.

If you have a finished build on an agent, you can use the checkout directory browser chechoutdirBrowser.png (which lists the checkout directory content on the agent) and select artifacts from the tree. TeamCity will place the paths to them into the input field.

The Artifact Paths field supports relative (to the build checkout directory) and absolute paths. Using relative paths is recommended. You can specify exact file paths or patterns, one per line or comma-separated. Patterns support the * and ** wildcards (see below). Each line can be of the form [+:]source [=> target] to include and -:source [=> target] to exclude files or directories to publish as build artifacts. The parts enclosed in square brackets are optional. Rules are grouped by the right part and are applied in the order of appearance:

+:**/* => target_directory -:directory1 => target_directory

will tell TeamCity to publish all files except for directory1 into the target_directory.

Line format description:

file_name|directory_name|wildcard [ => target_directory|target_archive ]

Note that although absolute paths are supported in the source part, it is recommended to use paths relative to the build checkout directory.

  • file_name — to publish the file. The name should be relative to the build checkout directory.

  • directory_name — to publish all the files and subdirectories within the directory specified. The directory name should be a path relative to the build checkout directory. The files will be published preserving the directories structure under the directory specified (the directory itself will not be included).

  • wildcard — to publish files matching Ant-like wildcard pattern (only * and ** wildcards are supported). The wildcard should represent a path relative to the build checkout directory. The files will be published preserving the structure of the directories matched by the wildcard (directories matched by "static" text will not be created). That is, TeamCity will create directories starting from the first occurrence of the wildcard in the pattern.

  • You can use build parameters in the artifacts' specification. For example, use mylib-%system.build.number%.zip to refer to a file with the build number in the name.

The optional part starting with the => symbols and followed by the target directory name can be used to publish the files into the specified target directory. If the target directory is omitted, the files are published in the root of the build artifacts. You can use . (dot) as a reference to the build checkout directory.
The target paths cannot be absolute. Non-relative paths will produce errors during the build.

  • target_directory — (optional) the directory in the resulting build's artifacts that will contain the files determined by the left part of the pattern.

  • target_archive — (optional) the path to the archive to be created by TeamCity by packing build artifacts determined in the left part of the pattern. TeamCity treats the right part of the pattern as target_archive whenever it ends with a supported archive extension, that is .zip, .7z, .jar, .tar.gz, or .tgz.

A symbolic link (symlink or soft link) is a Linux file that points to other files or directories and represents their absolute or relative path. If a directory that you need to publish as a build artifact contains symlinks, you can choose one of two possible modes:

  • Published archives include symlinks as symlinks. This is the default behavior. You can explicitly decorate an artifact path with the teamcity:symbolicLinks attribute to force this behavior.

    #teamcity:symbolicLinks=as-is %teamcity.build.checkoutDir%/build=>build.zip
  • Published archives include files and folders referenced by symlinks. To enable this behavior, decorate an artifact rule with the teamcity:symbolicLinks attribute as follows.

    #teamcity:symbolicLinks=inline %teamcity.build.checkoutDir%/build=>build.zip

Note that attributes affect only artifact publishing rules declared directly beneath them. For example, in the sample below only Archive_A will contain files and folders referenced by symlinks. Archive_B will employ the default behavior and include symlinks as files.

#teamcity:symbolicLinks=inline Dir_A=>Archive_A.zip Dir_B=>Archive_B.zip

Artifacts Paths Examples

  • install.zip — publish a file named install.zip in the build artifacts.

  • dist — publish the content of the dist directory.

  • target/*.jar — publish all jar files in the target directory.

  • target/**/*.txt=> docs — publish all the txt files found in the target directory and its subdirectories. The files will be available in the build artifacts under the docs directory.

  • reports => reports, distrib/idea*.zip — publish reports directory as reports and files matching idea*.zip from the distrib directory into the artifacts root.

  • Relative paths inside a zip archive can be used, if needed: results\result1\Dir1\Dir2 => archive.zip!results/result1/Dir1.

  • The same target_archive name can be used multiple times, for example:

    • +:*/*.html => report.zip

    • +:*/*.css => report.zip!/css/

    • -:*/*.txt => report.zip

Build Options

The following options are available to build configurations:

Hanging Build Detection

Select the Enable hanging build detection option to detect probably "hanging" builds. A build is considered to be "hanging" if its run time significantly exceeds the estimated average run time and if the build has not sent any messages since the estimation was exceeded. To properly detect hanging builds, TeamCity has to estimate the average time builds run based on several builds. Thus, if you have a new build configuration, it may make sense to enable this feature after a couple of builds have run, so that TeamCity would have enough information to estimate the average run time.

Allow Triggering Personal Builds

You can restrict running personal builds by unchecking the allow triggering personal builds option (on by default).

Enable Status Widget

This option enables retrieving the status and basic details of the last build in the build configuration without requiring any user authentication. Note that this also allows getting the status of any specific build in the build configuration (however, builds cannot be listed and no other information except the build status (success/failure/internal error/cancelled) is available).

The status can be retrieved via the HTML status widget described below, or via a single icon: with the help of REST API or via the Actions menu in Build Configuration Home.

HTML Status Widget

This feature allows you to get an overview of the current project status on your company's website, wiki, Confluence or any other web page.
When the Enable status widget option is enabled, an HTML snippet can be included into an external web page and will display the current build configuration status.
For build status icon as a single image, check REST build status icon.

The following build process information is provided by the status widget:

  • The latest build results

  • Build number

  • Build status

  • Link to the latest build artifacts. The status widget doesn't require users log in to TeamCity.

When the feature is enabled, you need to include the following snippets of code in the web page source:

  • Add this code sample in the <head> section (or alternatively, add the withCss=true parameter to externalStatus.html):

    <style type="text/css"> @import "<TeamCity_server_URL>/css/status/externalStatus.css"; </style>
  • Insert this code sample where you want to display the build configuration status:

    <script type="text/javascript" src="<TeamCity_server_URL>/externalStatus.html?js=1"> </script>
  • If you prefer to use plain HTML instead of javascript, omit the js=1 parameter and use iframe instead of the script:

    <iframe src="<TeamCity_server_URL>/externalStatus.html"/>
  • If you want to include default CSS styles without modifying the <head> section, add the withCss=true parameter.
    To provide up-to-date status information on specific build configurations, use the following parameter in the URL as many times as needed:

    &buildTypeId=<external build configuration ID>

It is also possible to show the status of all projects build configurations by replacing &buildTypeId=<external build configuration ID> with &projectId=<external project ID>. You can select a combination of these parameters to display the needed projects and build configurations on your web page.

You can also download and customize the externalStatus.css file (for example, you can disable some columns by using display: none; see comments in externalStatus.css). However, in this case, you must not include the withCss=true parameter, but provide the CSS styles explicitly, preferably in the <head> section, instead.

Limit Number of Simultaneously Running Builds

You can limit the number of builds that can run simultaneously on all agents. This option helps improve allocating resources for your builds and avoid the situation when all agents are busy with the builds of a single project.

You can limit the total number of builds for a build configuration and configure granular limits per branch using the related fields:

  • for a build configuration, enter the total maximum number of builds. The number is set to 0 by default allowing an unlimited number of builds to run simultaneously.

  • for a build limit per branch, enter the new-line separated list of rules. Each rule must follow the branch:number pattern, where branch is either a logical branch name or a pattern containing an * and number specifies the maximum number of builds which can run simultaneously in each branch matching the pattern. 0 allows an unlimited number of builds in the specified branch.

Last modified: 11 December 2023